Modify the analytical properties of the structural wall to accommodate structural analysis tools and procedures.
To change structural analytical properties, select the element. In the Properties palette, select the element specific analytical properties from the Properties filter.
|Analyze As||Either, Gravity, Lateral, or Gravity and Lateral. Used by external analysis applications to determine whether beam conditions contribute to lateral analysis.|
|Family Type||The family type of the element.|
|Physical Material Asset||The name of a physical asset assigned to the wall material (read-only).|
|Length||The length of the analytical model.|
|Cross-Section Rotation||Parameter that controls rotating beams and braces. The angle of rotation is measured from the beam’s work plane and the direction of the center reference plane.|
Either Interior Face of Element, Center of Element, Exterior Face of Element, Center of Core, <Grids...>, or <Reference Planes...>. Specifies the horizontal plane of the wall used for analysis and design. Available when Projection is specified as Alignment Method.
Specifies the location of the analytical model surface.
|Top Extension Method|
|Top y Projection||
Either Top of Wall, <Level...>, or <Reference Planes...>. Available when Top Extension Method is specified as Projection.
Specifies the vertical extension location of the analytical model at the top of the wall.
|Base Extension Method||Either Auto-Detect or Projection. Specifies if the vertical extension of the bottom of the wall is automatically justified or has a defined projection.|
|Base y Projection||
Either Bottom of Wall, <Level...>, or <Reference Planes...>. Available when Base Extension Method is specified as Projection.
Specifies the vertical extension location of the analytical model at the base of the wall.
|Surface Number||An identifier created for the analytical surface. This value should be unique across Analytical Floors, Analytical Foundation Slabs and Analytical Walls in a project. Revit warns you if the number is already used but allows you to continue using it. You can see the warning using the Review Warnings tool. See Reviewing Warning Messages.|
|Phase Created||Indicates in which phase the wall was created. See Project Phasing|
|Phase Demolished||Indicates in which phase the wall was demolished. See Project Phasing|