View scale definition

In the following procedure, you create views for the following section views (cross section of an RC beam with a stirrup and longitudinal beam section with stirrup distribution along the beam length).

To create views:

1. Click (Create View).
2. Indicate the first and second apex defining a view of the beam cross section as shown.
   
3. Specify the name of the view e.g. Cross section view and click ENTER.
4. Define the scale of the view or assume the default scale value 1:20, and click ENTER.

The view is generated with the specified name in the active document for the current position.

Using the same method to create a second view – view of the beam longitudinal section.