Use the tabs in this part of the dialog to define the following parameters:
- Overall - the option operates identically as in the case of single parts.
- Axial dimensions - dimensions are generated as a dimension chain showing axial dimensions of a presented group. Dimension points are generated at points of axis intersection (for groups, axes of main assembly parts are displayed; therefore, axial dimensions are determined only for the visible axes). Available options:
- Orthogonal - dimension chains are positioned along vertical or horizontal edges of the view.
- Aligned - dimensions are positioned as parallel to the dimensioned segment, and are not extended to the most distant points of a group. Additional dimension points are generated at the beginning and end of the group where there are no axis intersections.
- Both - both methods described above are applied.
- Assembly dimensions - dimensions display the entire dimensions of assemblies included in a group, and are generated identically as overall dimensions for each assembly separately. Available options:
- Chain - all dimensions are projected on a common external dimension line (chain) positioned vertically or horizontally.
- From edge - each dimension is displayed on a separate dimension line, each of which is parallel to the axes of the local coordinate system. They are located on the side of a dimensioned element that is positioned closer to dimension points.
- Aligned - dimensions are set in a parallel position with respect to the main assembly part (in the local coordinate system of the assembly), and are displayed on the external side of the assembly (in relation to the group center).
- Angular - the option operates identically as in the case of single parts.
The options of arc dimensioning operate identically as in the case of single parts.