AltRoundDistance プロパティ(ActiveX)

変換単位の丸めを指定します。

サポートされているプラットフォーム: Windows のみ

構文と要素

VBA:

object.AltRoundDistance

object

タイプ: DimAligned、DimArcLength、DimDiametric、DimOrdinate、DimRadial、DimRadialLarge、DimRotated

このプロパティが適用されるオブジェクト。

プロパティの値

読み込み専用: いいえ

タイプ: 倍精度浮動小数点数型

丸め距離を表す正の実数。初期値は 0.00 です。

注意

AltUnits プロパティがオンである場合に、このプロパティは丸め値を決定します。

注: このプロパティは、指定された寸法でシステム変数 DIMALTRND[併記丸め単位]の値を変更します。

例

VBA:

Sub Example_AltRoundDistance()
   ' This example creates an aligned dimension in model space and
   ' uses AltRoundDistance to set the alternate unit display
   ' of the dimension to rounded values

    Dim dimObj As AcadDimAligned
    Dim point1(0 To 2) As Double, point2(0 To 2) As Double
    Dim location(0 To 2) As Double
    
    ' Define the dimension
    point1(0) = 5: point1(1) = 5: point1(2) = 0
    point2(0) = 10.123: point2(1) = 5: point2(2) = 0
    location(0) = 5: location(1) = 7: location(2) = 0
    
    ' Create an aligned dimension object in model space
    Set dimObj = ThisDrawing.ModelSpace.AddDimAligned(point1, point2, location)
    
    ' Enable alternate unit display
    dimObj.AltUnits = True
    
    ThisDrawing.Application.ZoomAll
    
    MsgBox "Press any key to round the alternate dimension unit display to .5"
    
    ' Round the distance of the alternate dimension to 0.50 of a unit
    dimObj.AltRoundDistance = 0.5
    ThisDrawing.Regen acAllViewports
    
    MsgBox "Alternate dimension units have been rounded to: " & dimObj.AltRoundDistance
End Sub

Visual LISP:

(vl-load-com)
(defun c:Example_AltRoundDistance()
    ;; This example creates an aligned dimension in model space and
    ;; uses AltRoundDistance to set the alternate unit display
    ;; of the dimension to rounded values
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
  
    ;; Define the dimension
    (setq point1 (vlax-3d-point 5 5 0)
          point2 (vlax-3d-point 10.123 5 0)
          location (vlax-3d-point 5 7 0))

    ;; Create an aligned dimension object in model space
    (setq modelSpace (vla-get-ModelSpace doc))
    (setq dimObj (vla-AddDimAligned modelSpace point1 point2 location))
    
    ;; Enable alternate unit display
    (vla-put-AltUnits dimObj :vlax-true)
    
    (vla-ZoomAll acadObj)
    
    (alert "Round the alternate dimension unit display to .5")
    
    ;; Round the distance of the alternate dimension to 0.50 of a unit
    (vla-put-AltRoundDistance dimObj 0.5)
    (vla-Regen doc acAllViewports)
    
    (alert (strcat "Alternate dimension units have been rounded to: " (rtos (vla-get-AltRoundDistance dimObj) 2 4)))
)