UnitsFormat プロパティ(ActiveX)

角度寸法以外のすべての寸法の単位形式を指定します。

サポートされているプラットフォーム: Windows のみ

構文と要素

VBA:

object.UnitsFormat

object

タイプ: DimAligned、DimArcLength、DimDiametric、DimOrdinate、DimRadial、DimRadialLarge、DimRotated

このプロパティが適用されるオブジェクト。

プロパティの値

読み込み専用: いいえ

タイプ: acDimLUnits 列挙型

• acDimLScientific
• acDimLDecimal
• acDimLEngineering
• acDimLArchitectural
• acDimLFractional
• acDimLWindowsDesktop

注意

このプロパティの初期値は acDimLDecimal です。

このプロパティが acDimLDecimal に設定されている場合、DecimalSeparator および PrimaryUnitsPrecision プロパティで指定された形式が十進数値の形式設定に使用されます。

分数表記を使用した建築図面表記または分数表記の単位形式を作成するには、FractionFormat プロパティを使用します。

注: このプロパティは、指定された寸法でシステム変数 DIMLUNIT[長さ寸法表記形式]の値を変更します。

例

VBA:

Sub Example_UnitsFormat()
   ' This example creates an aligned dimension in model space and
   ' uses UnitsFormat to cycle through some common unit formats
   ' for the dimension

    Dim dimObj As AcadDimAligned
    Dim point1(0 To 2) As Double, point2(0 To 2) As Double
    Dim location(0 To 2) As Double
    
    ' Define the dimension
    point1(0) = 0: point1(1) = 5: point1(2) = 0
    point2(0) = 5.12345678: point2(1) = 5: point2(2) = 0
    location(0) = 5: location(1) = 7: location(2) = 0
    
    ' Create an aligned dimension object in model space
    Set dimObj = ThisDrawing.ModelSpace.AddDimAligned(point1, point2, location)
    ThisDrawing.Application.ZoomAll
    
    ' Cycle through common unit formats
    
    dimObj.UnitsFormat = acDimLScientific     ' Change format to Scientific
    ThisDrawing.Regen acAllViewports
    MsgBox "The dimension units are now set to Scientific"
    
    dimObj.UnitsFormat = acDimLDecimal        ' Change format to Decimal
    ThisDrawing.Regen acAllViewports
    MsgBox "The dimension units are now set to Decimal"
    
    dimObj.UnitsFormat = acDimLArchitectural  ' Change format to Architectural
    ThisDrawing.Regen acAllViewports
    MsgBox "The dimension units are now set to Architectural"
    
    dimObj.UnitsFormat = acDimLWindowsDesktop ' Change format to WindowsDesktop
    ThisDrawing.Regen acAllViewports
    MsgBox "The dimension units are now set to Windows Desktop"

End Sub

Visual LISP:

(vl-load-com)
(defun c:Example_UnitsFormat()
    ;; This example creates an aligned dimension in model space and
    ;; uses UnitsFormat to cycle through some common unit formats
    ;; for the dimension
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
    
    ;; Define the dimension
    (setq point1 (vlax-3d-point 0 5 0)
          point2 (vlax-3d-point 5.12345678 5 0)
          location (vlax-3d-point 5 7 0))
    
    ;; Create an aligned dimension object in model space
    (setq modelSpace (vla-get-ModelSpace doc))
    (setq dimObj (vla-AddDimAligned modelSpace point1 point2 location))
    (vla-ZoomAll acadObj)
    
    ;; Cycle through common unit formats
    (vla-put-UnitsFormat dimObj acDimLScientific)     ;; Change format to Scientific
    (vla-Regen doc acAllViewports)
    (alert "The dimension units are now set to Scientific")
    
    (vla-put-UnitsFormat dimObj acDimLDecimal)        ;; Change format to Decimal
    (vla-Regen doc acAllViewports)
    (alert "The dimension units are now set to Decimal")
    
    (vla-put-UnitsFormat dimObj acDimLArchitectural)  ;; Change format to Architectural
    (vla-Regen doc acAllViewports)
    (alert "The dimension units are now set to Architectural")
    
    (vla-put-UnitsFormat dimObj acDimLWindowsDesktop) ;; Change format to WindowsDesktop
    (vla-Regen doc acAllViewports)
    (alert "The dimension units are now set to Windows Desktop")
)