ToleranceLowerLimit プロパティ(ActiveX)

許容限界寸法値の下限を指定します。

サポートされているプラットフォーム: Windows のみ

構文と要素

VBA:

object.ToleranceLowerLimit

object

タイプ: Dim3PointAngular、DimAligned、DimAngular、DimArcLength、DimDiametric、Dimension、DimOrdinate、DimRadial、DimRadialLarge、DimRotated

このプロパティが適用されるオブジェクト。

プロパティの値

読み込み専用: いいえ

タイプ: 倍精度浮動小数点数型

許容限界寸法値の下限。

注意

このプロパティの初期値は 0.0000 です。

このプロパティは ToleranceDisplay プロパティが acTolDeviation または acTolLimits に設定されている場合にのみ使用できます。

注: このプロパティは、指定された寸法でシステム変数 DIMTM[最小許容差]の値を変更します。

例

VBA:

Sub Example_ToleranceLowerLimit()
    ' This example creates an aligned dimension in model space and
    ' sets the tolerance limits using the ToleranceLowerLimit and
    ' ToleranceUpperLimit properties

    Dim dimObj As AcadDimAligned
    Dim newText As AcadTextStyle
    Dim point1(0 To 2) As Double, point2(0 To 2) As Double
    Dim location(0 To 2) As Double
    
    ' Define the dimension
    point1(0) = 5: point1(1) = 5: point1(2) = 0
    point2(0) = 5.5: point2(1) = 5: point2(2) = 0
    location(0) = 5: location(1) = 7: location(2) = 0
    
    ' Create an aligned dimension object in model space
    Set dimObj = ThisDrawing.ModelSpace.AddDimAligned(point1, point2, location)
    
    ' Turn on tolerance display
    dimObj.ToleranceDisplay = acTolSymmetrical
    
    ThisDrawing.Application.ZoomAll
    
    ' Read and display the tolerance limits for the dimension
    MsgBox "The tolerance lower limit is set to: " & dimObj.ToleranceLowerLimit & vbCrLf & _
           "The tolerance upper limit is set to: " & dimObj.ToleranceUpperLimit
    
    ' Adjust the tolerance limits for this dimension
    dimObj.ToleranceLowerLimit = 0.0001
    dimObj.ToleranceUpperLimit = 0.005
    
    ThisDrawing.Regen acAllViewports
    
    ' Read and display the tolerance limits for the dimension
    MsgBox "The tolerance lower limit is now set to: " & dimObj.ToleranceLowerLimit & vbCrLf & _
           "The tolerance upper limit is now set to: " & dimObj.ToleranceUpperLimit

End Sub

Visual LISP:

(vl-load-com)
(defun c:Example_ToleranceLowerLimit()
    ;; This example creates an aligned dimension in model space and
    ;; sets the tolerance limits using the ToleranceLowerLimit and
    ;; ToleranceUpperLimit properties
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
    
    ;; Define the dimension
    (setq point1 (vlax-3d-point 5 5 0)
          point2 (vlax-3d-point 5.5 5 0)
          location (vlax-3d-point 5 7 0))
    
    ;; Create an aligned dimension object in model space
    (setq modelSpace (vla-get-ModelSpace doc))
    (setq dimObj (vla-AddDimAligned modelSpace point1 point2 location))

    ;; Turn on tolerance display
    (vla-put-ToleranceDisplay dimObj acTolSymmetrical)
    
    (vla-ZoomAll acadObj)
    (vla-Regen doc acAllViewports)
    
    ;; Read and display the tolerance limits for the dimension
    (alert (strcat "The tolerance lower limit is set to: " (rtos (vla-get-ToleranceLowerLimit dimObj) 2)
                   "\nThe tolerance upper limit is set to: " (rtos (vla-get-ToleranceUpperLimit dimObj) 2)))
    
    ;; Adjust the tolerance limits for this dimension
    (vla-put-ToleranceLowerLimit dimObj 0.0001)
    (vla-put-ToleranceUpperLimit dimObj 0.005)
    
    (vla-Regen doc acAllViewports)
    
    ;; Read and display the tolerance limits for the dimension
    (alert (strcat "The tolerance lower limit is now set to: " (rtos (vla-get-ToleranceLowerLimit dimObj) 2)
                   "\nThe tolerance upper limit is now set to: " (rtos (vla-get-ToleranceUpperLimit dimObj) 2)))
)