ToleranceSuppressZeroInches プロパティ(ActiveX)

寸法許容差値の 0 インチ計測値の省略を指定します。

サポートされているプラットフォーム: Windows のみ

構文と要素

VBA:

object.ToleranceSuppressZeroInches

object

タイプ: DimAligned、DimArcLength、DimDiametric、DimOrdinate、DimRadial、DimRadialLarge、DimRotated

このプロパティが適用されるオブジェクト。

プロパティの値

読み込み専用: いいえ

タイプ: ブール型

• True: 0 インチの寸法表示を省略します。
• False: 0 インチの寸法表示を省略しません。

注意

このプロパティの初期値は False です。

注: このプロパティは、指定された寸法でシステム変数 DIMTZIN[寸法許容差 0 省略]の値を変更します。

例

VBA:

Sub Example_ToleranceSuppressZeroInches()
    ' This example creates an aligned dimension in model space and
    ' uses ToleranceSuppressZeroInches to toggle the display of zeros inches
    ' in the dimension tolerance display

    Dim dimObj As AcadDimAligned
    Dim point1(0 To 2) As Double, point2(0 To 2) As Double
    Dim location(0 To 2) As Double
    
    ' Define the dimension
    point1(0) = 5: point1(1) = 5: point1(2) = 0
    point2(0) = 6.01: point2(1) = 5: point2(2) = 0
    location(0) = 5: location(1) = 8: location(2) = 0
    
    ' Create an aligned dimension object in model space
    Set dimObj = ThisDrawing.ModelSpace.AddDimAligned(point1, point2, location)
    dimObj.UnitsFormat = acDimLArchitectural
    
    ' Enable and setup tolerance display
    dimObj.ToleranceDisplay = acTolLimits
    dimObj.ToleranceLowerLimit = -95#: dimObj.ToleranceUpperLimit = 95#
    
    ZoomAll
    
Toggle:
    Select Case MsgBox("Press OK to toggle the display of zero inches in the dimension tolerance", vbOKCancel)
        Case vbOK
            ' Toggle the display of zero inches for the dimension tolerance value
            dimObj.ToleranceSuppressZeroInches = Not (dimObj.ToleranceSuppressZeroInches)
            ThisDrawing.Regen acAllViewports
        
        Case vbCancel
            Exit Sub
    End Select
    
    GoTo Toggle
End Sub

Visual LISP:

(vl-load-com)
(defun c:Example_ToleranceSuppressZeroInches()
    ;; This example creates an aligned dimension in model space and
    ;; uses ToleranceSuppressZeroInches to toggle the display of zeros inches
    ;; in the dimension tolerance display
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
    
    ;; Define the dimension
    (setq point1 (vlax-3d-point 5 5 0)
          point2 (vlax-3d-point 6.01 5 0)
          location (vlax-3d-point 5 8 0))
    
    ;; Create an aligned dimension object in model space
    (setq modelSpace (vla-get-ModelSpace doc))
    (setq dimObj (vla-AddDimAligned modelSpace point1 point2 location))
    (vla-put-UnitsFormat dimObj acDimLArchitectural)
    
    ;; Enable and setup tolerance display
    (vla-put-ToleranceDisplay dimObj acTolLimits)
    (vla-put-ToleranceLowerLimit dimObj -95)
    (vla-put-ToleranceUpperLimit dimObj 95)
  
    (vla-ZoomAll acadObj)

    ;; Toggle the display of zero inches for the dimension tolerance value
    (vla-put-ToleranceSuppressZeroInches dimObj (if (= (vla-get-ToleranceSuppressZeroInches dimObj) :vlax-true) :vlax-false :vlax-true))
    (vla-Regen doc acAllViewports)
    (alert "Suppression of zero inches toggled.")

    ;; Toggle the display of zero inches for the dimension tolerance value back to previous state
    (vla-put-ToleranceSuppressZeroInches dimObj (if (= (vla-get-ToleranceSuppressZeroInches dimObj) :vlax-true) :vlax-false :vlax-true))
    (vla-Regen doc acAllViewports)
    (alert "Suppression of zero inches toggled back.")
)