AltTextSuffix プロパティ(ActiveX)

角度寸法以外のすべての寸法タイプについての変換寸法計測値の接尾表記を指定します。

サポートされているプラットフォーム: Windows のみ

構文と要素

VBA:

object.AltTextSuffix

object

タイプ: DimAligned、DimArcLength、DimDiametric、DimOrdinate、DimRadial、DimRadialLarge、DimRotated

このプロパティが適用されるオブジェクト。

プロパティの値

読み込み専用: いいえ

タイプ: 文字列

変換単位寸法値の接尾表記。

注意

このプロパティの初期値は "" です。

設定されている末尾表記をオフにするには、このプロパティを単一のピリオド(.)に設定します。

注: このプロパティは、指定された寸法でシステム変数 DIMAPOST[併記接頭/接尾表記]の値を変更します。

例

VBA:

Sub Example_AltTextSuffix()
   ' This example creates an aligned dimension in model space and
   ' uses AltTextSuffix to allow the user to change the text suffix for the
   ' alternate dimension

    Dim dimObj As AcadDimAligned
    Dim point1(0 To 2) As Double, point2(0 To 2) As Double
    Dim location(0 To 2) As Double
    Dim suffix As String
    
    ' Define the dimension
    point1(0) = 0: point1(1) = 5: point1(2) = 0
    point2(0) = 5: point2(1) = 5: point2(2) = 0
    location(0) = 5: location(1) = 7: location(2) = 0
    
    ' Create an aligned dimension object in model space
    Set dimObj = ThisDrawing.ModelSpace.AddDimAligned(point1, point2, location)
    
    ' Enable alternate unit display
    dimObj.AltUnits = True
    
    ThisDrawing.Application.ZoomAll

    ' Allow the user to change the text suffix for the alternate dimension
    suffix = InputBox("Enter a new text suffix for the alternate dimension", "Alternate Dimension Suffix", ":SUFFIX")
    dimObj.AltTextSuffix = suffix   ' Commit changes to suffix
    
    ThisDrawing.Regen acAllViewports
    
    ' Read back and display the alternate dimension text suffix
    suffix = dimObj.AltTextSuffix
    If suffix <> "" Then
        MsgBox "The suffix of the alternate dimension has been changed to: " & suffix
    Else
        MsgBox "The suffix of the alternate dimension has been removed"
    End If
End Sub

Visual LISP:

(vl-load-com)
(defun c:Example_AltTextSuffix()
    ;; This example creates an aligned dimension in model space and
    ;; uses AltTextSuffix to allow the user to change the text suffix for the
    ;; alternate dimension
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
    
    ;; Define the dimension
    (setq point1 (vlax-3d-point 0 5 0)
          point2 (vlax-3d-point 5 5 0)
          location (vlax-3d-point 5 7 0))
    
    ;; Create an aligned dimension object in model space
    (setq modelSpace (vla-get-ModelSpace doc))
    (setq dimObj (vla-AddDimAligned modelSpace point1 point2 location))
       
    ;; Enable alternate unit display
    (vla-put-AltUnits dimObj :vlax-true)
    
    (vla-ZoomAll acadObj)

    ;; Allow the user to change the text suffix for the alternate dimension
    (setq suffix (vla-GetString (vla-get-Utility doc) :vlax-false "\nEnter a new text suffix for the alternate dimension: "))
    (vla-put-AltTextSuffix dimObj suffix)   ;; Commit changes to suffix
    
    (vla-Regen doc acAllViewports)
    
    ;; Read back and display the alternate dimension text suffix
    (setq suffix (vla-get-AltTextSuffix dimObj))
    (if (/= suffix "")
        (alert (strcat "The suffix of the alternate dimension has been changed to: " suffix))
        (alert "The suffix of the alternate dimension has been removed")
    )
)