ToleranceJustification プロパティ(ActiveX)

寸法値に対する、寸法許容差値の垂直方向の位置合わせを指定します。

サポートされているプラットフォーム: Windows のみ

構文と要素

VBA:

object.ToleranceJustification

object

タイプ: Dim3PointAngular、DimAligned、DimAngular、DimArcLength、DimDiametric、Dimension、DimOrdinate、DimRadial、DimRadialLarge、DimRotated

このプロパティが適用されるオブジェクト。

プロパティの値

読み込み専用: いいえ

タイプ: acDimToleranceJustify 列挙型

• acTolTop
• acTolMiddle
• acTolBottom

注意

このプロパティの初期値は acTolMiddle です。

このプロパティは ToleranceDisplay プロパティが acTolNone 以外の値に設定されている場合にのみ使用できます。

注: このプロパティは、指定された寸法でシステム変数 DIMTOLJ[許容差垂直位置]の値を変更します。

例

VBA:

Sub Example_ToleranceJustification()
    ' This example creates an aligned dimension in model space and
    ' sets the tolerance justification for the dimension to
    ' a couple of common values
    '
    ' * Note the vertical position of the tolerance text

    Dim dimObj As AcadDimAligned
    Dim newText As AcadTextStyle
    Dim point1(0 To 2) As Double, point2(0 To 2) As Double
    Dim location(0 To 2) As Double
    Dim CurrentDisplay As String
    
    ' Define the dimension
    point1(0) = 5: point1(1) = 5: point1(2) = 0
    point2(0) = 5.5: point2(1) = 5: point2(2) = 0
    location(0) = 5: location(1) = 7: location(2) = 0
    
    ' Create an aligned dimension object in model space
    Set dimObj = ThisDrawing.ModelSpace.AddDimAligned(point1, point2, location)
    
    ' Turn on tolerance display and increase the dimension text height,
    ' so the alignment of the tolerance is visible
    dimObj.ToleranceDisplay = acTolSymmetrical
    dimObj.textHeight = 1
    dimObj.ToleranceHeightScale = 0.25
    
    ThisDrawing.Application.ZoomAll
    
    ' Read and display the current tolerance justification for this dimension
    Select Case dimObj.ToleranceJustification
        Case acTolBottom: CurrentDisplay = "Bottom"
        Case acTolTop: CurrentDisplay = "Top"
        Case acTolMiddle: CurrentDisplay = "Middle"
    End Select
    
    MsgBox "The tolerance justification is currently: " & CurrentDisplay
    
    ' Set the tolerance justification for this dimension
    dimObj.ToleranceJustification = acTolBottom
    
    ThisDrawing.Regen acAllViewports
    
    ' Display the current tolerance justification for this dimension
    MsgBox "The tolerance display is now set to: Bottom"

End Sub

Visual LISP:

(vl-load-com)
(defun c:Example_ToleranceJustification()
    ;; This example creates an aligned dimension in model space and
    ;; sets the tolerance justification for the dimension to
    ;; a couple of common values
    ;;
    ;; * Note the vertical position of the tolerance text
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
    
    ;; Define the dimension
    (setq point1 (vlax-3d-point 5 5 0)
          point2 (vlax-3d-point 5.5 5 0)
          location (vlax-3d-point 5 7 0))
    
    ;; Create an aligned dimension object in model space
    (setq modelSpace (vla-get-ModelSpace doc))
    (setq dimObj (vla-AddDimAligned modelSpace point1 point2 location))
    
    ;; Turn on tolerance display and increase the dimension text height,
    ;; so the alignment of the tolerance is visible
    (vla-put-ToleranceDisplay dimObj acTolSymmetrical)
    (vla-put-TextHeight dimObj 1)
    (vla-put-ToleranceHeightScale dimObj 0.25)
    
    (vla-ZoomAll acadObj)
    (vla-Regen doc acAllViewports)
    
    ;; Read and display the current tolerance justification for this dimension
    (setq currentDisplay (cond
                             ((= (vla-get-ToleranceJustification dimObj) acTolBottom) "Bottom")
                             ((= (vla-get-ToleranceJustification dimObj) acTolTop) "Top")
                             ((= (vla-get-ToleranceJustification dimObj) acTolMiddle) "Middle")
                         ))
    
    (alert (strcat "The tolerance justification is currently: " currentDisplay))
    
    ;; Set the tolerance justification for this dimension
    (vla-put-ToleranceJustification dimObj acTolBottom)
    
    (vla-Regen doc acAllViewports)
    
    ;; Display the current tolerance justification for this dimension
    (alert "The tolerance display is now set to: Bottom")
)