DimLine1Suppress プロパティ(ActiveX)

1 本目の寸法線の省略を指定します。

サポートされているプラットフォーム: Windows のみ

構文と要素

VBA:

object.DimLine1Suppress

object

タイプ: Dim3PointAngular、DimAligned、DimAngular、DimArcLength、DimDiametric、DimRotated

このプロパティが適用されるオブジェクト。

プロパティの値

読み込み専用: いいえ

タイプ: ブール型

• True: 1 本目の寸法線を省略します。
• False: 1 本目の寸法線を省略しません。

注意

このプロパティの初期値は False です。

このプロパティが True に設定されている場合、1 本目の寸法補助線と寸法値の間の寸法線と矢印の表示は省略されます。

注: このプロパティは、指定された寸法でシステム変数 DIMSD1[寸法線省略 /1]の値よりも優先されます。

例

VBA:

Sub Example_DimensionLine1Suppress()
    ' This example creates a Dim3PointAngular object in model space
    ' and suppresses the dimension lines using the DimensionLine1Suppress
    ' and DimensionLine2Suppress properties
    
    Dim DimPointAngularObj As AcadDim3PointAngular
    Dim AngleVertex(0 To 2) As Double
    Dim FirstPoint(0 To 2) As Double, SecondPoint(0 To 2) As Double
    Dim TextPoint(0 To 2) As Double
    Dim Line1Suppressed As String, Line2Suppressed As String
    
    ' Define the new Dim3PointAngular object
    AngleVertex(0) = 0: AngleVertex(1) = 0: AngleVertex(2) = 0
    FirstPoint(0) = 2: FirstPoint(1) = 2: FirstPoint(2) = 0
    SecondPoint(0) = 1: SecondPoint(1) = 4: SecondPoint(2) = 0
    TextPoint(0) = 6: TextPoint(1) = 6: TextPoint(2) = 0

    ' Create the new Dim3PointAngular object in model space
    Set DimPointAngularObj = ThisDrawing.ModelSpace.AddDim3PointAngular(AngleVertex, FirstPoint, SecondPoint, TextPoint)
    ThisDrawing.Application.ZoomAll

    ' Read and display current line suppression information
    Line1Suppressed = IIf(DimPointAngularObj.DimLine1Suppress, "is suppressed", "is not suppressed")
    Line2Suppressed = IIf(DimPointAngularObj.DimLine2Suppress, "is suppressed", "is not suppressed")
    
    MsgBox "Line one of the dimension " & Line1Suppressed & vbCrLf & _
           "Line two of the dimension " & Line2Suppressed

    ' Suppress line one of the dimension
    DimPointAngularObj.DimLine1Suppress = True
    ThisDrawing.Regen acAllViewports
    MsgBox "Line one of the dimension is now suppressed"
    
    ' Suppress line two of the dimension
    DimPointAngularObj.DimLine2Suppress = True
    ThisDrawing.Regen acAllViewports
    MsgBox "Line two of the dimension is now suppressed"
   
    ' Turn both dimension lines back on
    DimPointAngularObj.DimLine1Suppress = False
    DimPointAngularObj.DimLine2Suppress = False
    ThisDrawing.Regen acAllViewports
    MsgBox "Both dimension lines are now visible again"

End Sub

Visual LISP:

(vl-load-com)
(defun c:Example_DimensionLine1Suppress()
    ;; This example creates a Dim3PointAngular object in model space
    ;; and suppresses the dimension lines using the DimensionLine1Suppress
    ;; and DimensionLine2Suppress properties
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
    
    ;; Define the new Dim3PointAngular object
    (setq AngleVertex (vlax-3d-point 0 0 0)
          FirstPoint (vlax-3d-point 2 2 0)
          SecondPoint (vlax-3d-point 1 4 0)
          TextPoint (vlax-3d-point 6 6 0))

    ;; Create the new Dim3PointAngular object in model space
    (setq modelSpace (vla-get-ModelSpace doc))  
    (setq DimPointAngularObj (vla-AddDim3PointAngular modelSpace AngleVertex FirstPoint SecondPoint TextPoint))
    (vla-ZoomAll acadObj)

    ;; Read and display current line suppression information
    (setq Line1Suppressed (if (= (vla-get-DimLine1Suppress DimPointAngularObj) :vlax-true) "is suppressed" "is not suppressed"))
    (setq Line2Suppressed (if (= (vla-get-DimLine2Suppress DimPointAngularObj) :vlax-true) "is suppressed" "is not suppressed"))
    
    (alert (strcat "Line one of the dimension " Line1Suppressed
                   "\nLine two of the dimension " Line2Suppressed))

    ;; Suppress line one of the dimension
    (vla-put-DimLine1Suppress DimPointAngularObj :vlax-true)
    (vla-Regen doc acAllViewports)
    (alert "Line one of the dimension is now suppressed")
    
    ;; Suppress line two of the dimension
    (vla-put-DimLine2Suppress DimPointAngularObj :vlax-true)
    (vla-Regen doc acAllViewports)
    (alert "Line two of the dimension is now suppressed")
   
    ;; Turn both dimension lines back on
    (vla-put-DimLine1Suppress DimPointAngularObj :vlax-false)
    (vla-put-DimLine2Suppress DimPointAngularObj :vlax-false)
    (vla-Regen doc acAllViewports)
    (alert "Both dimension lines are now visible again")
)