To export model data to IMX

This topic describes how to use the Export to IMX tool to prepare model data for export and use in any application where the IMX format works for you, including AutoCAD Civil 3D. However, if you're working with AutoCAD Civil 3D, it's recommended that you use the new, enhanced data exchange process instead of exporting to IMX using this tool.

Note: See About Exchanging Data with AutoCAD Civil 3D to read about the enhanced data exchange process and workflow between Autodesk AutoCAD Civil 3D and InfraWorks 360. Enhancements include opening all or part of a model from within AutoCAD Civil 3D without first exporting model data using the export to IMX tool and enhanced data configuration translations.

Note: Due to schema changes, an IMX file that you export from Autodesk InfraWorks 360 can not be imported into any release of AutoCAD Civil 3D prior to the 2015 release.

To export data to IMX

1. Make sure the data layers you want to include in the export are set to visible in the Model Explorer.

   Toggle next to a feature class to make layers visible (or to hide layers. Hid layers are not included in the export.

2. Zoom out to see the area to export.
3. Click .
4. In the Export To IMX dialogue box, specify the area to export:
   • To populate the dialogue box fields with the values of a recently executed export operation, click the down arrow next to Start With Recent Export. Select an export operation.

     Recent exports are listed by their target file names.

   • To export the entire model, select Use Entire Model.
   • To specify an area to export, click Define Interactively and do the following:
     • Click the first point on a point identification box for the data to include.
     • Stretch the box to include the area you want, then double-click to finalise the selection.
   • To export specific extents, enter values in the minimum and maximum X,Y boxes or click Load Extent From File and browse to a file containing the extents.
5. Select the target co-ordinate system by doing any of the following:
   • Use the co-ordinate system shown. This is either the co-ordinate system assigned to the model or the last co-ordinate system you selected.
     Note: uses the best fit CT it can find for the extents of the export area. Check if this target co-ordinate system matches one suited to the location where you want to use the exported data. If it doesn't, then choose one from the co-ordinate system library. Note also that AutoCAD Civil 3D doesn't recognise and translate well models using a projection co-ordinate system such as LL84.
     • To select from a co-ordinate system library, click .
     • To specify a recently-used co-ordinate system, click the down arrow and select it.
   Note: When preparing to exchange model data with AutoCAD Civil 3D, it's recommended that InfraWorks 360 users follow the guidelines in the section on Co-ordinate Systems and Units in About Exchanging Data Between AutoCAD Civil 3D and Autodesk InfraWorks.
6. Specify the name and location for the exported file.

   To change the location, click the folder icon and browse to the desired location.

7. Click Export.