SaveVersion Property (ActiveX/ATO)

Specifies the file version to use when saving all drawing files during the creation of a transmittal package.

Supported platforms: Windows only

Namespace: TRANSMITTALLib

Assembly: AcETransmit19.tlb

Signature

VBA/VB.NET/C#:

object.saveVersion

object

Type: TransmittalInfo

The object this property applies to.

Property Value

Read-only: No

Type: SaveDwgFormat enum

Remarks

Use the constant value of eNoConversion to not change the file format of the drawing files during the creation of a transmittal package.

Release Information

Releases: AutoCAD 2004 and later

AcETransmit19.tlb - AutoCAD 2015 and later
AcETransmit18.tlb - AutoCAD 2010 through AutoCAD 2014
- The TransmittalInfo2 interface was merged with the TransmittalInfo interface in the AutoCAD 2010 version of the library.
AcETransmit16.tlb - AutoCAD 2005 through AutoCAD 2009
- The saveVersion method was also introduced with the TransmittalInfo2 interface in the AutoCAD 2005 version of the library.
- The saveVersion method was originally introduced with the TransmittalInfo interface in the AutoCAD 2004 version of the library, but was marked for Autodesk internal use only.

Examples

VB.NET:

' Custom function used to setup a TransmittalInfo object
Private Shared Function TransInfo(ti As TransmittalInfo, destination As String) _
    As TransmittalInfo

    ' Specify the folder that the files should be copied to
    If System.IO.Directory.Exists(destination) = False Then
        System.IO.Directory.CreateDirectory(destination)
    End If

    ' Assign the location which the transmittal package should be stored
    ti.destinationRoot = destination

    ' Maintain sub directories (0 - False, 1 - True)
    ti.preserveSubdirs = vbTrue

    ' Maintain folder paths
    ' ti.organizedFolder = 0 and ti.preserveSubdirs = 0 - 
    '             All files are placed in a single folder which is specified 
    '             by the destinationRoot property
    ' ti.organizedFolder = 1 and ti.preserveSubdirs = 0 - 
    '             Files are placed in a single folder, but maintain one level 
    '             of subdirectory strcuture
    ' ti.organizedFolder = 0 and ti.preserveSubdirs = 1 - 
    '             Folder structure is maintained, but the paths for 
    '             reference files are not
    ' ti.organizedFolder = 1 and ti.preserveSubdirs = 1 - 
    '             Folder structure and reference paths are maintained
    ti.organizedFolder = vbTrue

    ' Change referenced files to use relative paths (0 - False, 1 - True)
    ti.dataLinkRelativePath = vbTrue
    ti.DGNUnderlayRelativePath = vbTrue
    ti.DWFUnderlayRelativePath = vbTrue
    ti.imageRelativePath = vbTrue
    ti.PDFUnderlayRelativePath = vbTrue
    ti.xrefRelativePath = vbTrue

    ' Set the default drawing file format for all DWG, DWT, and DWS files
    ' SaveDwgFormat.eAutoCAD14 - AutoCAD R14
    ' SaveDwgFormat.eAutoCAD2000 - AutoCAD 2000
    ' SaveDwgFormat.eAutoCADR18 - AutoCAD 2004
    ' SaveDwgFormat.eAutoCADR21 - AutoCAD 2007
    ' SaveDwgFormat.eAutoCADR24 - AutoCAD 2010
    ' SaveDwgFormat.eAutoCADR27 - AutoCAD 2013
    ' SaveDwgFormat.eNoConversion - Keep current format
    ti.saveVersion = SaveDwgFormat.eNoConversion

    ' Maintain visual fidelity (SAVEFIDELITY system variable)
    ' 0 - Saved without visual fidelity 
    ' 1 - Annotation objects assigned annotative scales are saved to
    '     separate layers for each scale used.
    '     Only affects drawings when saving to AutoCAD 2007 or earlier file formats.
    ti.visualFidelity = vbTrue

    ' Include DWG Xrefs (Unloaded and Unreferenced: 0 - False, 1 - True)
    ti.includeXrefDwg = vbTrue
    ti.includeUnloadedReferences = vbTrue
    ti.includeUnloadedXrefDwg = vbTrue
    ti.includeNestedOverlayXrefDwg = vbTrue

    ' Bind xrefs attached to a drawing (0 - False, 1 - True)
    ' BindType.eBind - Use the Bind type to bind the xrefs
    ' BindType.eInsert - Use the Insert type to bind the xrefs
    ti.BindType = BindType.eInsert

    ' Remove paths from xrefs (0 - False, 1 - True)
    ti.depathXrefs = vbTrue

    ' Include images, underlays, and datalink file (0 - False, 1 - True)
    ti.includeImageFile = vbTrue
    ti.includeDGNUnderlay = vbTrue
    ti.includeDWFUnderlay = vbTrue
    ti.includePDFUnderlay = vbTrue
    ti.includeDataLinkFile = vbTrue

    ' Include font (SHX/TTF) and font map (FMP) files (0 - False, 1 - True)
    ti.includeFontFile = vbTrue

    ' Reset plotters for layouts in the drawings to None, 
    ' and include plot style (CTB/STB) files (0 - False, 1 - True)
    ti.resetPlotter = vbFalse
    ti.includePlotFile = vbTrue

    ' Specify where the plot files are located so the API can resolve the file 
    ' paths (used when includePlotFile = vbTrue or 1)
    ti.plotConfigFilePath = Environment.GetEnvironmentVariable("UserProfile") + _
             "\AppData\Roaming\Autodesk\AutoCAD 2016\R20.1\enu\Plotters"
    ti.plotStyleTablePath = Environment.GetEnvironmentVariable("UserProfile") + _
             "\AppData\Roaming\Autodesk\AutoCAD 2016\R20.1\enu\Plotters\Plot Styles"

    ' Get the photometric Web and material files used by lights 
    ' and 3D objects for rendering (0 - False, 1 - True)
    ti.includePhotometricWebFile = vbTrue
    ti.includeMaterialTextureFile = vbTrue

    ' Purge unused named objects for all drawing files in the 
    ' Transmittal(Package(0 - False, 1 - True))
    ti.purgeDatabase = vbFalse

    Return ti
End Function

C#: