To Work With 3D Gizmo Tools

Specify Which 3D Gizmo is Displayed by Default

1. At the Command prompt, enter DEFAULTGIZMO.
2. Do one of the following:
   • Enter 0 for the 3D Move gizmo (default).
   • Enter 1 for the 3D Rotate gizmo.
   • Enter 2 for the 3D Scale gizmo.
   • Enter 3 to have no gizmo display when an object is selected.

Switch the 3D Gizmo Type During Move, Rotate, or Scale

1. Select the 3D objects that you want to move, rotate, or scale.
   • To modify the entire object, select the object.
   • To modify a subobject (face, edge, or vertex), press Ctrl+click the subobject. (You can limit the selection set by specifying a subobject selection filter on the shortcut menu.)
2. Hover the cursor over an axis handle on the gizmo until it turns yellow and the axis vector is displayed. Then click the axis handle.
3. Press the Spacebar to cycle through the gizmo types until the correct gizmo is displayed.

   When you change gizmos this way, the movement remains constrained to the selected axis.

Relocate a 3D Gizmo Base Grip

1. Right-click the center box (base grip) of the gizmo and select Relocate Gizmo.
2. Click in the drawing area to specify a new location.

   For best results, use object snaps.

Set the Default Location for 3D Gizmos

1. At the Command prompt, enter GTLOCATION.
2. Do one of the following:
   • Enter 1 to set the location at the geometric center of the selection set.
   • Enter 0 to set the location to overlap the UCS icon.
3. Press Enter.