Checks drawings for potential problems when opening them.
| Type: | Integer |
| Saved in: | Registry |
| Initial value: | 1 |
|
0 |
If a drawing that you try to open has a potential problem, you are warned before the drawing is opened. |
|
1 |
If a drawing that you try to open has a potential problem, or if it was saved by an application other than one released by Autodesk or based on RealDWG, you are warned before the drawing is opened. |
|
2 |
If a drawing that you try to open has a potential problem, you are notified at the Command prompt. |
|
3 |
If a drawing that you try to open has a potential problem, you are notified at the Command prompt. If the drawing has a potential problem and the drawing was saved by an application other than one released by Autodesk or based on RealDWG, you are warned before the drawing is opened. |