End islands are placed at the ends of a row of parking bays.
Click on the End Islands tab.
Set the Offset to adjacent bay to the distance from the start of the end island to the side marking of the last bay.
Set the Bayside corner radius to the radius of the corners of the island that meet the bay.
Set the Outer corner radius to the radius of the corners of the island that are adjacent to the access road.
Set the Minimum internal width to the minimum width of the island at any point.
Select Allow width to increase to allow the island stretch sideways.
Set the Minimum width at kerb to the minimum width of the island where it meets the curb, i.e. on the baseline.
Select Draw island to show the island. Note that even if this option is not selected, the island is still calculated and the space allocated.
Select Hatch and / or Cross hatch to display a hatch pattern within the island. You may adjust the hatch Spacing and Angle.
Click the Attributes button to modify the Color, Line type and Line weight in the Attributes dialog.