To Add or Remove a Target Point

To insert a new target point

1. Enter grip editing mode so that the editing grips are displayed.
2. In between the existing target point markers, select the Insert Target Point grip closest to where you wish to insert a target point.
   If you cannot see an intermediate grip, you may need to reduce the distance between intermediate grips as follows:

   1. On the Autodesk Vehicle Tracking toolbar, click System Settings AutoDrive tab.
   2. Adjust the Minimum Distance Between Intermediate Grips.

To remove a target point

You can only remove one target point at a time. If you drop the selected point onto an intermediate grip, the point will not be removed but moved, and this can result in an errored path.

1. Enter grip editing mode so that the editing grips are displayed.
2. Select the Adjust Target Point grip of the target point that you want to remove.
3. Drag the grip over the top of the preceding or following target point, and left click to confirm. The selected target point will be removed.