Wheel stops are placed a short distance back from the end of the bay and prevent vehicles from overhanging the end.
Click on the Wheel Stops tab.
The Width of the wheel stop is measured in the direction of the length of the bay.
The Length of the wheel stop is measured in the direction of the width of the bay.
Select Stretch to fill bay width to place wheel stops across the entire width of the bay.
Select Shared wheel stops to place wheel stops on the dividing line between two adjacent bays. If you select this option, then you will no longer be able to place the wheel stop using Offset from side of bay or Place in center of bay.
The Top width indent is the taper in the width of the wheel stop, e.g. if the base width is 0.3m and the width at the top is 0.2m then the top width indent is 0.05m.
The Top length indent is the taper in the length of the wheel stop, e.g. if the base length is 1.5m and the length at the top is 1.4m then the top length indent is 0.05m.
The Offset from end of bay is the distance from the center of the wheel stop to the end of the bay.
The Offset from side of bay is the distance from the center of the wheel stop to the bay side line on the driver’s side.
Select Place in center of bay to position the wheel stop in the middle of the bay width.
Click the Line Style button to modify the Color, Line type and Line weight in the Attributes dialog.