To Add Rumble Strips

Rumble strips are known by various names around the world but are basically a speed control device.

1. Click the New Rumble Strips button on the Junctions toolbar or select New Rumble Strips from the Junctions drop down menu.
2. Select the junction to which you wish to add the rumble strips if not preselected.
3. Now simply move the cursor over the required arm. If you have dimensions switched on while editing the distance of the start of the rumble strips from the yield line is displayed.
4. Click to confirm the crossing location. Default rumble strips will be drawn.
5. You will be left in ‘add rumble strips’ mode so you may continue to add rumble strips to other arms if required. Right click when you have finished adding rumble strips.