You can define extra space around parking bays for special uses, e.g. for disabled drivers in this dialog.
Click on the Safety Zones tab.
The defined safety zones are listed in the large window. As you move the cursor between the entries, the edit boxes beneath show the values associated with the selected safety zone.
The Extra on driver side is the extra width required on the driver’s side of the bay.
The Extra on passenger side is the extra width required on the passenger’s side of the bay.
The Extra on entrance is the extra length required at the entrance of the bay.
The Offset from bay is the distance from the bay side line to the start of the safety zone markings.
The Corner radius is the radius to be applied to the corners of the safety zone.
Select Draw safety zones to show the safety zone markings. Note that this option merely switches off the display of the markings, the safety zone area is still calculated and taken into account when determining bay layout.
Select Share safety zones to allow the extra area allocated for adjacent safety zones to overlap.
Select Hatch and / or Cross hatch to display a hatch pattern within the safety zone. You may adjust the hatch Spacing and Angle.
Click the Line Style button to modify the Colour, Line type and Line weight in the Attributes dialog.
Click New to add a new safety zone. Highlight a safety zone and click Duplicate to create a copy of an existing safety zone or click Delete to delete the selected zone.