AEC BS1192 Part 5 Layer/Level Naming Convention

Under the AEC naming convention the layers or levels are named as follows:

V070PX$??GBATRxxRyyrd

where

• ?? is the current elevation (00 if none found)
• xx is the path number
• yy is the report number (on this path)
• r is the report subject (Body, Chassis, Path, Symbols, Text)
• d is the direction of travel (Forward or Reverse)

Note: The direction is not used in reports that use a single layer or level.

The default discipline code ( V) (which is not listed in the AEC disciplines) has been chosen because Autodesk Vehicle Tracking is used by professionals from a wide range of disciplines and this code allows the vehicle data to be isolated. Likewise the part code is normally discipline dependent so an unallocated code ( 070) has been selected for use here. Finally, pen colour or type is user-dependent so code P is used here. All layer names can be edited if required.

The path and all report elements have explicitly defined colors and line types. Their colors and line types cannot therefore be changed by changing layer or level settings.

Parking data is placed on the same layers as used in the complex convention.