Select Place Row of Bays from the Vehicle Tracking, Parking Layout menu or click the Place Row of Bays button on the Parking Layout toolbar.
If this is the first row placed in the current drawing, and you do not have a default standard set, the Parking Standard Explorer is displayed for you to select the required standard (see Viewing a standard in a parking standard file or the pool. If you do not have a default standard set, you may then be offered the chance to set it as your default. Finally, give the standard a unique name for easy reference in the current drawing.
The Row Properties dialog is displayed non-modally, i.e. you can still access the main CAD window without closing the dialog first.
Set the row properties.
Move the cursor to where you want the row baseline to start and left click to confirm.
Note: You may use snap to help you locate the precise start position.
Move the cursor to end of the row and left click to confirm.
Repeat this process, placing a point at each vertex or bend on the row.
When you have placed the last point, right click to exit.
Finally you should select which side you want bays, either left, right or both. The red arrow that is displayed halfway along each row segment shows the current setting. Move the cursor to the left of the row to select bays only on the left, to the right to select bays only on the right or over the row baseline to select bays on both sides.
Note: To disable the row side selection while the Parking Row Properties dialog is displayed, clear Skip row side selection before placing the row.