To Add a Road

1. As with creating a new roundabout, to add a road to a roundabout you will need to be able to pick the alignment. Draw a polyline to represent the centerline of the road if one does not already exist.
2. Click the New Road button on the Junctions toolbar or select New Road from the Junctions drop down menu.
3. Select the junction to which you wish to add the road if not preselected.
4. Select the road centerline roughly at the point at which you anticipate it will join to the existing road. The New Arm dialog is displayed.
5. Enter a Name, Description and/or Notes if you wish and click OK. The arm is displayed.
   Tip: If you are running in Civil 3D, we strongly recommend that you name the arm now so that the alignments are created with the correct names. Autodesk Vehicle Tracking does not rename alignments if you change the roundabout arm names after creation.
6. If the arm does not display, then you may have picked the alignment too close to the roundabout. Try again. If you still can’t add the arm continue to the next one and add the arm after you have adjusted the alignment.