On the Servicing tab, the servicing is divided into Servicing Points and Servicing Vehicles and then further into each type of service.
- To add a service point or vehicle, highlight the type you wish to add and click New.
- Enter a Name for the service point or vehicle.
- Enter the X Offset & Y Offset of the service point or the front axle of the service vehicle relative to the Reference Datum. X ordinates increase towards the back of the aircraft and the Y ordinates are positive to the right of the centerline and negative to the left.
- Enter a Bearing for the service point or vehicle in degrees relative to the spine of the aircraft. Zero is due East.
- To delete a service point or vehicle, highlight it and click Delete.
- If you add a service point or vehicle to the wrong type, simply select the correct Type from the drop down list and the service moves. It is not possible to move an entry from service points to vehicles or vice versa.
To add a copy of a service point at a different height
- Highlight the service point and click New.
- Enter the Height of the service point. All the other details are copied automatically from the parent.
- To delete a service point height, highlight it and click Delete.