To Place Discrete Body Outlines

You can add discrete outlines using the reports dialogs. However, there is a quick way to add them using the Place Outline command.

1. Select the path on which you want to add discrete outlines.
2. On the Autodesk Vehicle Tracking toolbar, click Place Outline, or click Vehicle Tracking menu Place Outline.

   The Place/Remove Outline dialog is displayed.

3. Select the elements to add.
4. To place them, move the cursor until they appear at the required location on the path and left click to confirm.

   You can remove or update the selected outlines by reselecting the location, and the following rules apply:

   • If all the selected elements are present at the selected location, then a left click removes all elements.
   • If any of the selected elements are not present at the selected location, then a left click adds the missing elements.
5. To remove a particular outline from a location, select the outline type and select the location.
6. To quickly remove all outlines from a location, select all outline types and select the location twice: once to add any non-existent outlines, and a second time to remove them all.