This sub-report applies to various report types, including body, chassis, loads, etc. Each report type can have different settings for its loci sub-report.
After selecting Show Loci/Tracks to enable this element, you can select from among the available features.
- Only Loci Critical Points is available only in the Body Outline report. This option will trace only the front offside corners of the body and the cut-in points on each side.
- Show Outermost Tire Tracks is available only in the Chassis report. This option will show the path of the inside face of the outermost tires; if the vehicle has twin wheels, then only the outer one is tracked.
- Layer selection cannot be used if you are using a layering convention. Otherwise, you can select from the existing layers or specify a new layer for the report.
- Line Type and Color controls provide a wide range of selections. If you want a Color other than the 255 listed, select Custom and click on the colour swatch to select from a color chart.
AutoCAD Only
The pen numbers directly correlate with AutoCAD's pen numbering system (color indices in later versions). If you select a custom color that does not correspond to a defined pen color, it will be treated as TrueColor.
- For Line Weight, 0.0 mm is the default, and forces the thinnest possible line. Wider lines are drawn symmetrically about the centerline.
Note: Variations in line weight are only visible on printed output or in a print preview.