To Work With Vehicle Details Reports

To insert a vehicle details report

1. Select the path whose vehicle details you wish to insert.
2. On the Autodesk Vehicle Tracking toolbar, click Insert Profile, or click Vehicle Tracking menu Insert Profile.

   A ghosted picture of the vehicle is displayed at the cursor.

3. Move the mouse to position the report and left click to confirm.

To move a vehicle details report

1. Select the report that you want to move. Note that the report and its associated path and any other reports are displayed selected.
2. Pick the grip at the center of the front wheels of the first unit, and holding the left mouse button down, move the details report as required. Release the mouse button to drop the report.

To remove a vehicle details report

1. Select the report that you want to remove.
2. On the Vehicle Tracking toolbar, click Properties, or click Vehicle Tracking menu Properties.
3. Select the Reports tab.
4. Click the + next to Report 0001 to display the sub-reports and clear the check mark for the Profile subreport.

   If you have more than one report listed, such as Report 0001, Report 0002, Report 003, then you will need to expand each in turn and make sure that the Profile report is disabled in each one.