Exercise 2: Creating Survey Data Using the Traverse Editor

In this exercise, you will use the Traverse Editor to create survey data.

The Traverse Editor is used to edit the observations of an existing named traverse or to enter traverse observations for a new traverse.

This exercise continues from Exercise 1: Creating Survey Data Using the Toolspace Survey Tab.

Create a new survey database

1. Open Survey-4B.dwg, which is located in the tutorials drawings folder.
2. In Toolspace, on the Survey tab, right-click Survey Databases. Click New Local Survey Database.
3. In the New Local Survey Database dialog box, for the name, enter Survey 3. Click OK.
4. In Toolspace, on the Survey tab, right-click the database Survey 3. Click Edit Survey Database Settings.
5. In the Survey Database Settings dialog box, under Measurement Type Defaults, specify the following parameters:
   • Angle Type: Angle
   • Distance Type: Horizontal
   • Vertical Type: None
   • Target Type: None
6. Click OK.

Create a survey network

1. In Toolspace, on the Survey tab, expand the Survey 3 database. Right-click the Networks collection. Click New.
2. In the Network dialog box, for Name, enter Survey Network 3.
3. Click OK.

Set up a traverse and define control points

1. In Toolspace, on the Survey tab, expand the Survey DatabasesSurvey 3NetworksSurvey Network 3. Right-click the Traverses collection. Click New.
2. In the New Traverse dialog box, for Name, enter Traverse 3. Click OK.
3. On the Survey tab, select the Traverses collection. In the list view, right-click Traverse 3. Click Edit Traverse.
4. In the Specify Initial Setup dialog box, specify the following parameters:
   • Initial Station: 1
   • Initial Backsight: 4
5. Click OK.
6. A message is displayed indicating that initial station point 1 is not defined. Click Yes to define it.
7. In the New Control Point dialog box, specify the following parameters:
   • Point Number: 1
   • Easting: 1000
   • Northing: 1000
   • Description: STA 1
8. Click OK.
9. A message is displayed indicating that backsight point 4 is not defined. Click Yes to define it.
10. A message is displayed indicating that a backsight direction must be created. Click Yes to create it.
11. In the New Direction dialog box, specify the following parameters:
    • Direction: 45
    • Direction Type: Azimuth
12. Click OK.

    The Traverse Editor is displayed.

13. In the right side of the editor, for Station 1, Backsight 4, specify the following parameters:
    • (point number): 2
    • Angle: 90
    • Distance: 100
    • Description: STA 2
14. For Station 2, Backsight 1, specify the following parameters:
    • (point number): 3
    • Angle: 90
    • Distance: 100
    • Description: STA 3
15. For Station 3, Backsight 2, specify the following parameters:
    • (point number): 4
    • Angle: 90
    • Distance: 100
    • Description: STA 4
16. For Station 4, Backsight 3, specify the following parameters:
    • (point number): 1
    • Angle: 90
    • Distance: 100
17. Click to save the traverse information.
18. On the Survey tab, right-click Survey Network 3 and click Insert Into Drawing.

    The new survey data is displayed in the drawing.

    Click to see what the network should look like.

    

To continue this tutorial, go to Exercise 3: Creating Survey Data Using the Survey Command Window.