Add a transition to fill an area between two existing grading objects or to create a grading that has transitioning values.
A transition is an area that merges the grading of the regions on either side, for example, from 3:1 to 2:1.
There are several ways to create transitions:
- You can select a location within an existing grading.
A transition inserted inside an existing grading
- You can select a location between two existing gradings. The transition start and end points are defined by the existing projection lines.
A transition inserted between gradings
- You can select start and end points for the transition and then define the parameters to use at each end. You can use the same criteria for both ends or you can switch criteria.
A transition created between 2% and 6%
In addition, you are sometimes prompted to create transitions when you use the Create Grading command. This occurs when the start point of a new grading is inside or touching an existing grading.
A grading inserted with accompanying transitions
