The following table lists the surface-related AutoCAD Civil 3D commands and briefly describes their functionality.
Command |
Description |
---|---|
AddContourLabeling | Adds multiple surface contour labels at points of intersection with contour label line |
AddContourLabelingGroup | Adds multiple surface contour labels at a set interval |
AddContourLabelingSingle | Adds a single surface contour label |
AddSpotElevLabelsOnGrid | Adds a spot elevation label on grid |
AddSurfaceBoundaries |
Adds a boundary to an existing surface |
AddSurfaceBreaklines |
|
AddSurfaceContours |
|
AddSurfaceDEMFile |
|
AddSurfaceDrawingObjects |
|
AddSurfaceGridPoint |
|
AddSurfaceLabels | Invokes a labeling tool used to add slope elevations or slope labels |
AddSurfaceLine |
|
AddSurfacePoint |
|
AddPointFile |
|
AddSurfacePointGroup |
|
AddSurfaceSlopeLabel |
|
AddSurfaceSpotElevLabel |
|
BreaklineTool |
Identifies and fixes any intersecting breaklines in a drawing, survey figure, or survey database |
CatchmentArea |
Displays catchment regions and calculates the area of catchment regions |
CheckForContourProblems |
Identifies problems with contours |
CreateCropSurface |
Creates a surface that is a copy of the selected polygonal area of another surface |
CreateSurface |
|
CreateSurfaceComposite |
|
CreateSurfaceGridFromDEM |
Creates a grid surface from a DEM (Digital Elevation Model) file |
CreateSurfaceFromGIS |
Imports data from a GIS datastore to create an AutoCAD Civil 3D surface |
CreateSurfaceFromPointCloud |
|
CreateSurfaceFromTIN |
|
CreateSurfaceReference |
Creates a surface reference |
CreateSurfaceMask |
|
CreateSurfaceStyle |
|
CreateSurfaceWaterdrop | |
CreateSurfCntrLabelLine |
|
DeleteSurfaceGridPoint |
|
DeleteSurfaceLine |
|
DeleteSurfacePoint |
Deletes points from a TIN surface to remove inaccurate or unnecessary data |
DeleteSurfaceSlopeLabel |
|
DrapeImage | Drapes an image onto a surface |
EditSurfacePaste |
|
EditSurfacePoint |
|
EditSurfaceProperties |
|
EditSurfaceSettings |
|
EditSurfaceStyle |
|
EditSurfaceSwapEdge |
|
ExportSurfaceToSolid |
Converts TIN surfaces to AutoCAD solids |
MinimizeSurfaceFlatAreas |
Minimizes the flat areas on a surface created from contours |
MinimumDistBetweenSurfaces | Identifies the shortest vertical distance between two surfaces |
ModifySurfaceContourLabels |
|
ModifySurfaceSlopeLabel |
|
ModifySurfSpotElevLabel |
|
MoveBlocksToAttribElev |
Moves a block to an elevation value specified in one of its nested attribute values |
MoveBlocksToSurface | |
MoveTextToElevation | Moves text to the elevation corresponding to its numeric value |
MoveSurfacePoint |
|
RaiseLowerSurface |
|
RebuildSurface |
|
ReportSurfaceVolume |
|
SimplifySurface |
|
SmoothSurface |
|
StageStorage |
|
SurfaceModifyGridPoint |
|
SurfaceExportToDem |
|
SurfaceExtractObjects |
|
VolumesDashboard |
Calculates cut, fill, and net volumes for volume surfaces and bounded areas within those surfaces |