You can quickly enable or disable snap types by using the Snap Types drop-down menu on the Options panel of the Factory tab. The snap options are synchronized with the settings in the Factory Options dialog box.
- Snap to Floor - snaps to the floor plane
- Snap to Grid - snaps to the intersection of any major or minor grid lines
- Snap to Sketch - snaps to endpoints, midpoints, or along any sketched entity
- Snap to Connector - snaps to predefined connection points that have been defined in assets
- Snap to Surface - snaps to the surface of a placed asset in the factory layout
- Snap to Vertex or Edge - snaps to the vertex or edge of a placed asset in the factory layout
- Snap to DWG Overlay - snaps to endpoints, midpoints, or along any drawing entity on the DWG overlay
- Snap to Trail Line - snaps to the virtual intersections of points or vertices and is used in conjunction with the Reposition command for precise asset positioning
- Snap to Point Cloud - snaps to a selected point in a point cloud
Note: If the Snap Types drop-down menu is disabled, open the Factory Options dialog box, click the Snap tab, and activate the Enable check box.
Use the Snap Types drop-down menu to enable or disable the different snap tools.
-
On the ribbon, click
Factory tab
Options panel
Snap Types
. A drop-down menu displays. - Check or uncheck the options to enable or disable the snap tools.