Description
The Autofold DEC file is composed of a Header Line, Item Lines, and a Footer Line. The functions of each of these is described below.
Header Line
The Autofold Format starts with a single header line made up of 4 fields:
| Field | Function | Description |
| 1 | Format Name | Always "Map3" |
| 2 | Job Name | The CAMduct Job name |
| 3 | Unit | M for Metric Units I for Imperial Units |
| 4 | Data Lines | Number Data lines following the Header line |
Item Lines
The Autofold format continues with a data line for each item to be manufactured. This is made up of 13 data fields on each data line.
| Field | Function | Description |
| 1 | Item | Item No as displayed in CAMduct Job Contents - Items view |
| 2 | Quantity | Item Quantity |
| 3 | Section Name | One of these Text Values: "BOX STD" - Full wrap - Seam Folds = NO "BOX PITTS" - Full wrap - Seam Folds = YES "L STD" - 2 x L shapes - Seam Folds = NO "L PITTS" - 2 x L shapes - Seam Folds = YES "U STD" - U Shape "FLATLOCK" - One Flat side with allowances "FLAT" - One Flat side - Used for Nest Blanks This is controlled by the Folds setting for Seam in the Seams tab of Installed Decoiler setup. |
| 4 | Seam Name | Seams as set up in Pattern Database e.g. "RAS" |
| 5 | Dim 1 | Size of first Duct side |
| 6 | Dim 2 | Size of second Duct side |
| 7 | Dim 3 | Always 0 |
| 8 | Length | Length of Straight = Coil Width |
| 9 | Gauge | Material Gauge or thickness in mm |
| 10 | Notch Type | N=0 Connector Notch No N=1 Connector Notch Yes Controlled by Notch Setting for Connector in Connectors Tab of Installed Decoiler Setup
|
| 11 | Fold Type | F=0 Do Not Perform Fold Action F=1 Do Perform Fold Action Controlled by Fold Settings on Other tab of Installed Decoiler Setup
Please note, the values shown may not match the settings required on this machine. |
| 12 | Roll Type |
DC=0 Connector Roll = No DC=1 Connector Roll = Yes Controlled by Roll Setting for Connector in Connectors tab of Installed Decoiler Setup.
|
| 13 | ? | SL=0 This field is always 0, Not controlled by CAMduct |
Footer Line
The file ends with a line with % to mark the end of the line.