Linear Grading Layout

Module 1 (KB) - Page 1 of 2

• Hue: Modify the hue value.
Note: The hue can only be modified on secondaries.
• R Lift: Modify the lift of the red channel.
• G Lift: Modify the lift of the green channel.
• B Lift: Modify the lift of the blue channel.
• Contrast: Modify contrast value.
• R Gamma: Modify the gamma of the red channel.
• G Gamma: Modify the gamma of the green channel.
• B Gamma: Modify the gamma of the blue channel.
• Saturation: Modify the saturation value.
• R Gain: Modify the gain of the red channel.
• G Gain: Modify the gain of the green channel.
• B Gain: Modify the gain of the blue channel.

Module 1 (KB) - Page 2 of 2

• Black Clip: Modify the black clip value.
• White Clip: Modify the white clip value.
• Black Ref: Modify the black reference value.
• White Ref: Modify the white reference value.
• LiftCtOff: Modify the lift cutoff value.
• GammaCtOff: Modify the gamma cutoff value.
• GainCtOff: Modify the gain cutoff value.

Module 2 (TK) - Page 1 of 4

Note: The Grade mode functions are always available, even when not in Grading mode. To access the Grading functions while in other modes, press the A button to cycle through the Grading pages. Pressing the A button twice brings you back to the first page of the current mode.

• Lift: Move the trackball right or left (x axis) to modify the lift in the low, mid and high range colour values (Master).
• Lift: Move the trackball up or down (y axis) to modify the lift in the low, mid and high range colour values (Master).
• Lift: Move the ring left or right to modify the lift of the luminance channel.
• Gamma: Move the trackball right or left (x axis) to modify the gamma in the low, mid and high range colour values (Master).
• Gamma: Move the trackball up or down (y axis) to modify the gamma in the low, mid and high range colour values (Master).
• Gamma: Move the ring left or right to modify the gamma of the luminance channel.
• Gain: Move the trackball right or left (x axis) to modify the gain in the low, mid and high range colour values (Master).
• Gain: Move the trackball up or down (y axis) to modify the gain in the low, mid and high range colour values (Master).
• Gain: Move the ring left or right to modify the gain of the luminance channel.

Module 2 (TK) - Page 2 of 4

• Low Lift: Move the trackball right or left (x axis) to modify the lift in the low range colour values.
• Low Lift: Move the trackball up or down (y axis) to modify the lift in the low range colour values.
• Low Lift: Move the ring left or right to modify the lift of the luminance channel in the low range colour values.
• Low Gamma: Move the trackball right or left (x axis) to modify the gamma in the low range colour values.
• Low Gamma: Move the trackball up or down (y axis) to modify the gamma in the low range colour values.
• Low Gamma: Move the ring left or right to modify the gamma of the luminance channel in the low range colour values.
• Low Gain: Move the trackball right or left (x axis) to modify the gain in the low range colour values.
• Low Gain: Move the trackball up or down (y axis) to modify the gain in the low range colour values.
• Low Gain: Move the ring left or right to modify the gain of the luminance channel in the low range colour values.

Module 2 (TK) - Page 3 of 4

• Mid Lift: Move the trackball right or left (x axis) to modify the lift in the mid range colour values.
• Mid Lift: Move the trackball up or down (y axis) to modify the lift in the mid range colour values.
• Mid Lift: Move the ring left or right to modify the lift of the luminance channel in the mid range colour values.
• Mid Gamma: Move the trackball right or left (x axis) to modify the gamma in the mid range colour values.
• Mid Gamma: Move the trackball up or down (y axis) to modify the gamma in the mid range colour values.
• Mid Gamma: Move the ring left or right to modify the gamma of the luminance channel in the mid range colour values.
• Mid Gain: Move the trackball right or left (x axis) to modify the gain in the mid range colour values.
• Mid Gain: Move the trackball up or down (y axis) to modify the gain in the mid range colour values.
• Mid Gain: Move the ring left or right to modify the gain of the luminance channel in the mid range colour values.

Module 2 (TK) - Page 4 of 4

• High Lift: Move the trackball right or left (x axis) to modify the lift in the high range colour values.
• High Lift: Move the trackball up or down (y axis) to modify the lift in the high range colour values.
• High Lift: Move the ring left or right to modify the lift of the luminance channel in the high range colour values.
• High Gamma: Move the trackball right or left (x axis) to modify the gamma in the high range colour values.
• High Gamma: Move the trackball up or down (y axis) to modify the gamma in the high range colour values.
• High Gamma: Move the ring left or right to modify the gamma of the luminance channel in the high range colour values.
• High Gain: Move the trackball right or left (x axis) to modify the gain in the high range colour values.
• High Gain: Move the trackball up or down (y axis) to modify the gain in the high range colour values.
• High Gain: Move the ring left or right to modify the gain of the luminance channel in the high range colour values.

Module 3 (MF) - Page 1 of 3

• InPrimary: Enable input primary grading mode.
• OutPrimary:Enable output primary grading mode.
• Inside: Double-press to enable inside grading in secondary mode (grading affects the inside of your shape) for the currently selected shape. Inside grading is enabled by default. Single-press to select inside grading and edit your grade.
  Note: Inside grading is enabled by default.
• Outside: Double-press to enable outside grading in secondary mode (grading affects the outside of your shape) for the currently selected shape. Once enabled, single-press to select outside grading, to edit your grade.
• Grade: Access the Colour/Grade menu.
• PanScan: Access the Image/Reposition menu.
• Geometry: Enable the draw geometry mode in the Secondaries menu. The fourth row of functions on the module is dynamically updated to display the rectangle, circle and wipe options. Pressing the corresponding button enables you to add the desired geometry.
• Prefs: Access the preferences functions.
• Curves: Access the Colour/Curves menu.
• Keyer: Enable the keyer in the secondaries menu. The default behavior is to enable the HLS keyer. Pressing Keyer again enables the diamond keyer.
• Editing: Access the Editing/Timeline menu.
• Undo: Undo the last operation performed. Pressing the B button changes the function of the Undo button to Redo. The panel display is be updated. Pressing the B button and Redo will redo the last operation (if you previously undid it).

• Confirm: When the Lustre UI prompts you to confirm an operation, the Undo button is automatically updated to display Confirm. Press to confirm the operation.

Module 3 (MF) - Page 2 of 3

• InPrimary: Enable input primary grading mode.
• OutPrimary:Enable output primary grading mode.
• Inside: Double-press to enable inside grading in secondary mode (grading affects the inside of your shape) for the currently selected shape. Inside grading is enabled by default. Single-press to select inside grading and edit your grade.
Note: Inside grading is enabled by default.
• Outside: Double-press to enable outside grading in secondary mode (grading affects the outside of your shape) for the currently selected shape. Once enabled, single-press to select outside grading, to edit your grade.
• O/P/M: Toggle between output, print and matte views.
• Autokey: Enable/disable Autokey.
• Reset: Press once to reset the currently selected grading tool. Press twice to reset all grading tools.
• SetKey: Set a keyframe at the current position on the currently selected channel. Pressing the B button changes the function of the SetKey button to SetKey All. The panel display is updated.

• SetKeyAll: Set a keyframe at the current position on all channels.
• A/B:Toggle A/B playheads.
• SingleView: Toggle between single, dual and multi views, as defined under the Preferences.
• Bypass:Press once to bypass the currently selected grading tool. Press twice to bypass all grading tools.
• Undo: Undo the last operation performed. Pressing the B bnutton will change the function of the Undo button to Redo. The panel display is updated. Pressing the B button and Redo will redo the last operation (if you previously undid it).

Module 3 (MF) - Page 3 of 3

• InPrimary: Enable input primary grading mode.
• OutPrimary:Enable output primary grading mode.
• Inside: Double-press to enable inside grading in secondary mode (grading affects the inside of your shape) for the currently selected shape. Inside grading is enabled by default. Single-press to select inside grading and edit your grade.
Note: Inside grading is enabled by default.
• Outside: Double-press to enable outside grading in secondary mode (grading affects the outside of your shape) for the currently selected shape. Once enabled, single-press to select outside grading, to edit your grade.
• Stereo: Enable stereoscopy.
• L/R: Toggle between tight eye view and left eye view modes (when working with stereoscopic footage).
• MultiCopy: Enter multi copy mode. When in multi copy mode, turn the ring to cycle your shots forward or backwards to copy the selected grade to your current shot. When you release the ring, the Undo button is automatically updated to display Apply. Press Apply to confirm and repeat the process for other shots as needed. To exit multi copy mode, press the MultiCopy button again.

• SaveAll: Save your current cut and grade.
• Sync: Sync your left and right eyes when working with stereoscopic footage. When in sync, any operation performed on the left eye is also applied to the right eye.
• Cursor: Enable cursor mode. When cursor mode is enabled, the trackball is used to move the cursor in the UI. In cursor mode, the Reset Trackball button acts as the left mouse button and the Reset Ring button acts as the right mouse button.
• Copy: Enter copy mode. When in copy mode, turn the ring to cycle your shots forward or backwards to copy the selected grade to your current shot. When you release the ring, the Undo button is automatically updated to display Apply. Press Apply to confirm the copy operation. Once the copy operation confirmed, you automatically exit copy mode.

• Undo: Undo the last operation performed. Pressing the B button will change the function of the Undo button to Redo. The panel display will be updated. Pressing the B button and Redo will redo the last operation (if you previously undid it).

Module 4 (BT) - Page 1 of 6

Secondaries List (4 pages, 12 secondaries per page).

Module 4 (BT) - Page 5 of 6

Grade Bin - Load

The BT Panel also controls your Grade Bin for saving and loading grades. The buttons mirror the position of saved grades in the Grade Bin.

• A Button: Exit the Grade Bin.
• B Button: Toggle between load mode and save mode in the Grade Bin.

Note: The trackball of the MF module navigates the Grade Bin when in Grade Bin mode.

Module 4 (BT) - Page 6 of 6

Grade Bin - Save

• A Button: Exit the Grade Bin.
• B Button: Toggle between load mode and save mode in the Grade Bin.

Note: The trackball of the MF module navigates the Grade Bin when in Grade Bin mode.

Optional 2nd BT Module - Page 1 of 1

It is recommended to attach a second BT module, which is mapped to give you access to many of the most used functions at all times. These functions correspond to the second and third page of the MF module.

• SingleView: Toggle between single, dual and multi views, as defined under the Preferences.
• A/B: Toggle A/B playheads. Pressing Alt (B key) will change the function of the A/B button to L/R. The panel display is updated.

• L/R: Toggle between right eye view and left eye view modes (when working with stereoscopic footage).
• Bypass:Press once to bypass the currently selected grading tool. Press twice to bypass all grading tools.
• Reset:Press once to reset the currently selected grading tool. Press twice to reset all grading tools.
• Multi 2: Toggle the number of active viewports when in multi view. Options are:
  • 2
  • 4
  • 9
  • 16
• Matte: Enable/disable matte view.
• Autokey: Enable/disable Autokey.
• Copy: Enter copy mode. When in copy mode, turn the ring on the MF module to cycle your shots forward or backwards to copy the selected grade to your current shot. When you release the ring, the Undo button on the MF module is automatically updated to display Apply. Press Apply to confirm. Once the copy operation confirmed, you automatically exit copy mode. Pressing the B button changes the function of the Copy button to MultiCopy. The panel display is updated.

• MultiCopy: When in muilti copy mode, turn the ring on the MF module to cycle your shots forward or backwards to copy the selected grade to your current shot. When you release the ring, the Undo button on the MF module is automatically updated to display Apply. Press Apply to confirm and repeat the process for other shots as needed. To exit multi copy mode, press the MultiCopy button again.
• 2-up: Toggle the display mode when in dual view. Options are:

  For A/B

  • 2-up
  • HorizWipe
  • VertWipe

  For L/R

  • 2-up
  • HorizWipe
  • VertWipe
  • Blend
• O/P: Toggle between output and print views.
• SetKey: Set a keyframe at the current position on the currently selected channel. Pressing the B button will change the function of the SetKey button to SetKeyAll. The panel display is updated.

• SetKeyAll: Set a keyframe at the current position on all channels.
• Save All: Save your current cut and grade.