Module 1 (KB) - Page 1 of 2
- TolAll: Set the global tolerance for your key (hue, luminance and saturation channels).
- TolHue: Set the tolerance for the hue channel.
- TolLum: Set the tolerance for the luminance channel.
- TolSat: Set the tolerance for the saturation channel.
- SoftAll: Set the global softness for your key (hue, luminance and saturation channels).
- SoftHue: Set the softness for the hue channel.
- SoftLum: Set the softness for the luminance channel.
- SoftSat: Set the softness for the saturation channel.
- Range Hue: Offset the tolerance range for the hue channel.
- Range Lum: Offset the tolerance range for the luminance channel.
- Range Sat: Offset the tolerance range for the saturation channel.
Module 1 (KB) - Page 2 of 2
- MatInvert: Press the knob to invert your matte.
- MatClean: Set the matte cleanup value.
- MatShrink: Set the matte shrink value.
- MatteBlur: Set the matte blur value.
Module 3 (MF) - Page 1 of 4
- InPrimary:Toggle input primary and output Primary grading modes.
- Grade: Access the Colour/Grade menu.
- Geometry:Enable the draw geometry mode in the Secondaries menu. The fourth row of functions on the module is dynamically updated to display the rectangle, circle and wipe options. Pressing the corresponding button enables you to add the desired geometry.
- Prefs: Access the preferences functions.
- Inside: Double press to enable inside grading in secondary mode (grading affects the inside of your shape) for the currently selected shape. Inside grading is enabled by default. Single press to select inside grading and edit your grade.
- Curves: Access the Colour/Curves menu.
- Keyer: Enable the keyer in the Secondaries menu. The default behavior is to enable the HLS keyer. Pressing Keyer again enables the diamond keyer.
- Undo: Undo the last operation performed. Pressing the B button will change the function of the Undo button to Redo. The panel display will be updated. Pressing the B button and Redo will redo the last operation (if you previously undid it).
- Outside: Double press to enable outside grading in secondary mode (grading affects the outside of your shape) for the currently selected shape. Single press to select outside grading, to edit your grade.
- PanScan: Access the Image/Reposition menu.
- Editing: Access the Editing/Timeline menu.
- Enter: Confirm operations.