Repositioning Shots

You can reposition a shot by:

• Scaling
• Panning vertically and horizontally
• Rotating
• Changing the aspect ratio
• Flipping and flopping

When Sync mode is enabled in a stereoscopic project, you can use the Convergence tool to pan and scale both eyes at the same time in opposite directions.

To reposition a shot:

1. Press the P&S button on the Navigation panel.
   
2. On the Function panel, use the following controls.
   

   Use:	To:
   Wheels	Reposition the image. Wheel 1=Pan X Wheel 2=Pan Y Wheel 3=Scale Wheel 4=Rotate To reset a wheel, press the button above it.
   Knob at right	Change the image's aspect ratio. To reset, press the button below it.
   First row of buttons at bottom right	Flip or flop the image. F1=Flip F3=Flop Toggle the state of the Convergence Tool. F5=Toggle Convergence
   SHOW button	Toggle the geometry wireframe on or off.