Navigation bar

The navigation bar floats over and along one of the sides of the window for the current model. It contains both unified and product-specific navigation tools, organized into separate areas.

You start navigation tools by clicking one of the buttons on the navigation bar or selecting one of the tools from a list that displays when you click the smaller portion of a split button.

Unified Navigation Command

Unified navigation commands (such as Autodesk® ViewCube® and SteeringWheels) are used across many Autodesk products. They are located on the two ends of the navigation bar.

• SteeringWheels Collection of wheels for rapid switching between specialized navigation tools.

Product-specific Navigation Commands

Product-specific navigation commands are unique to a product. They are located in the center of the navigation bar.

• Pan Moves the view parallel to the screen.
• Zoom tools Set of navigation tools for increasing or decreasing the magnification of the current view of a model.
• Orbit tools Set of navigation tools for rotating the current view of a model.
• View Face Views the faces of a model from a selected plane.

You can add the following product-specific navigation tools to the navigation bar using the Customize menu.

• Previous View Returns the graphics display to the previous view orientation and zoom scale.
• Next View Reverts to the next view after Previous View is used.
• Projection Displays parts and assemblies in orthographic or perspective projections.
• Visual Styles Displays the list of available visual styles that can be applied to models.

Position and orientation of the navigation bar

The navigation bar displays by default in the upper right in the graphics window. Using the Customize menu, you can:

• Adjust the position and orientation of the navigation bar.
• Link it to the ViewCube, which positions it above or below the ViewCube in a vertical orientation.
• Dock it when the ViewCube is not displayed.
• Freely position it along an edge of the current window.

When not linked or docked, you can align the navigation bar along one of the edges of the window of the current model. If the side of the window is not long enough to show the entire navigation bar, truncates to fit. When truncated, a More Controls button displays and replaces the Customize button. When you click the More Controls button, a menu displays with the navigation tools that are not currently displayed.

Specify commands to display on the Navigation Bar

Using the Customize menu, you can control which navigation commands are displayed on the navigation bar. You cannot change the position of the navigation commands on the navigation bar.