Walk Tool

Navigates through a model as if you were walking through it. Once you start the Walk tool, the Center Circle icon displays near the center of the view, and the cursor changes to display a series of arrows. To walk through the model, you drag in the direction in which you want to move.

Constrain the Walk Angle

When walking through a model, you can constrain the movement angle to the ground plane. If the Constrain movement to ground plane option is enabled, you can freely walk around while maintaining a constant camera viewpoint elevation. If the walk angle is not constrained, you "fly" in the direction you are looking. Use the Options dialog box for the SteeringWheels to constrain the movement angle to the ground plane for the Walk tool.

Control Movement Speed

As you walk or "fly" through a model, you can control the movement speed. Movement speed is controlled by the distance in which the Cursor is moved from the Center Circle icon and the current movement speed setting. You can adjust the movement speed setting permanently or temporarily as you use the Walk tool. To permanently adjust the movement speed, use the Options dialog box for the SteeringWheels or the < and > keys when the Walk tool is active. To temporarily increase movement speed, press and hold the + (plus) key while using the Walk tool.

Change the Elevation

As you use the Walk tool, adjust the camera elevation by holding down SHIFT. This action temporarily activates the Up/Down tool. With the Up/Down tool active, drag up or down to adjust the elevation of the camera. You can also use the UP ARROW and DOWN ARROW keys as you walk to adjust the height of the view.

Move through the model using the Walk tool

1. Display one of the Full Navigation wheels or the mini Tour Building wheel.
2. Click and hold down the Walk wedge.

   The cursor changes to the Walk cursor, and the Center Circle icon displays.

3. Drag in the direction you want to walk.
   Note: While walking, press and hold down the + (plus) key to temporarily increase your movement speed.
4. Release the button on your pointing device to return to the wheel.

Change the movement speed for the Walk tool

1. Display a wheel.
2. Right-click the wheel, and click Options.
3. In the SteeringWheels Options dialog box, under Walk Tool, drag the Walk Speed slider to the left to decrease the walking speed, or to the right to increase the walking speed.
4. Click OK.

Constrain the Walk tool to the ground plane

1. Display a wheel.
2. Right-click the wheel, and click Options.
3. In the SteeringWheels Options dialog box, under Walk Tool, select Constrain movement to ground plane.
4. Click OK.

   The movement of walking is parallel to the ground plane of the model.

Adjust the height of the current view from the Walk tool

1. Display one of the Full Navigation wheels or the mini Tour Building wheel.
2. Click and hold down the Walk wedge.

   The cursor changes to the Walk cursor and the Center Circle icon displays.

3. Press and hold down the SHIFT key to enable the Up/Down tool; drag up or down.

   or

   Press and hold down the UP ARROW or DOWN ARROW key.

4. Release the button on your pointing device to return to the wheel.