animCurveEditor

Go to: Synopsis. Return value. Flags. MEL examples.

Synopsis

animCurveEditor [-areCurvesSelected] [-autoFit string] [-classicMode boolean] [-clipTime string] [-constrainDrag uint] [-control] [-curvesShown] [-curvesShownForceUpdate] [-defineTemplate string] [-denormalizeCurvesCommand string] [-displayActiveKeyTangents string] [-displayActiveKeys string] [-displayInfinities string] [-displayKeys string] [-displayNormalized boolean] [-displayTangents string] [-displayValues string] [-docTag string] [-exists] [-filter string] [-forceMainConnection string] [-highlightConnection string] [-lockMainConnection] [-lookAt string] [-mainListConnection string] [-menu script] [-normalizeCurvesCommand string] [-outliner string] [-panel string] [-parent string] [-preSelectionHighlight boolean] [-renormalizeCurves] [-resultSamples time] [-resultScreenSamples int] [-resultUpdate string] [-selectionConnection string] [-showActiveCurveNames boolean] [-showBufferCurves string] [-showCurveNames boolean] [-showResults string] [-showUpstreamCurves boolean] [-smoothness string] [-snapTime string] [-snapValue string] [-stackedCurves boolean] [-stackedCurvesMax float] [-stackedCurvesMin float] [-stackedCurvesSpace float] [-stateString] [-unParent] [-unlockMainConnection] [-updateMainConnection] [-useTemplate string] editorName

animCurveEditor is undoable, queryable, and editable.

Return value

In query mode, return type is based on queried flag.

Flags

Long name (short name)	Argument types	Properties
-areCurvesSelected(-acs)
Returns a boolean to know if at least one curve is selected in the graph editor.
-autoFit(-af)	string
on | off | tgl Auto fit-to-view.
-classicMode(-cm)	boolean
When on, the graph editor is displayed in "Classic Mode", otherwise "Suites Mode" is used.
-clipTime(-ct)	string
Valid values: "on" "off" Display the clips with their offset and scale applied to the anim curves in the clip.
-constrainDrag(-cd)	uint
Constrains all Graph Editor animation curve drag operations to either the X-axis, the Y-axis, or to neither of those axes. Values to supply are: 0 for not constraining any axis, 1 for constraing the X-axis, or 2 for constraining the Y-axis. When used in queries, this flag returns the latter values and these values have the same interpretation as above. Note: when the shift key is pressed before dragging the animation curve, the first mouse movement will instead determine (and override) any prior set constrained axis.
-control(-ctl)
Query only. Returns the top level control for this editor. Usually used for getting a parent to attach popup menus. Caution: It is possible for an editor to exist without a control. The query will return "NONE" if no control is present.
-curvesShown(-cs)
Returns a string array containing the names of the animCurve nodes currently displayed in the graph editor.
-curvesShownForceUpdate(-csf)
Returns a string array containing the names of the animCurve nodes currently displayed in the graph editor. Unlike the curvesShown flag, this will force an update of the graph editor for the case where the mainListConnection has been modified since the last refresh.
-defineTemplate(-dt)	string
Puts the command in a mode where any other flags and args are parsed and added to the command template specified in the argument. They will be used as default arguments in any subsequent invocations of the command when templateName is set as the current template.
-denormalizeCurvesCommand(-dcc)	string
Sets the script that is run to denormalize curves in the graph editor. This is intended for internal use only.
-displayActiveKeyTangents(-dat)	string
on | off | tgl Display active key tangents in the editor.
-displayActiveKeys(-dak)	string
on | off | tgl Display active keys in the editor.
-displayInfinities(-di)	string
on | off | tgl Display infinities in the editor.
-displayKeys(-dk)	string
on | off | tgl Display keyframes in the editor.
-displayNormalized(-dn)	boolean
When on, display all curves normalized to the range -1 to +1.
-displayTangents(-dtn)	string
on | off | tgl Display tangents in the editor.
-displayValues(-dv)	string
on | off | tgl Display active keys and tangents values in the editor.
-docTag(-dtg)	string
Attaches a tag to the editor.
-exists(-ex)
Returns whether the specified object exists or not. Other flags are ignored.
-filter(-f)	string
Specifies the name of an itemFilter object to be used with this editor. This filters the information coming onto the main list of the editor.
-forceMainConnection(-fmc)	string
Specifies the name of a selectionConnection object that the editor will use as its source of content. The editor will only display items contained in the selectionConnection object. This is a variant of the -mainListConnection flag in that it will force a change even when the connection is locked. This flag is used to reduce the overhead when using the -unlockMainConnection , -mainListConnection, -lockMainConnection flags in immediate succession.
-highlightConnection(-hlc)	string
Specifies the name of a selectionConnection object that the editor will synchronize with its highlight list. Not all editors have a highlight list. For those that do, it is a secondary selection list.
-lockMainConnection(-lck)
Locks the current list of objects within the mainConnection, so that only those objects are displayed within the editor. Further changes to the original mainConnection are ignored.
-lookAt(-la)	string
all | selected | currentTime FitView helpers.
-mainListConnection(-mlc)	string
Specifies the name of a selectionConnection object that the editor will use as its source of content. The editor will only display items contained in the selectionConnection object.
-menu(-m)	script
Specify a script to be run when the editor is created. The function will be passed one string argument which is the new editor's name.
-normalizeCurvesCommand(-ncc)	string
Sets the script that is run to normalize curves in the graph editor. This is intended for internal use only.
-outliner(-o)	string
The name of the outliner that is associated with the graph editor.
-panel(-pnl)	string
Specifies the panel for this editor. By default if an editor is created in the create callback of a scripted panel it will belong to that panel. If an editor does not belong to a panel it will be deleted when the window that it is in is deleted.
-parent(-p)	string
Specifies the parent layout for this editor. This flag will only have an effect if the editor is currently un-parented.
-preSelectionHighlight(-psh)	boolean
When on, the curve/key/tangent under the mouse pointer is highlighted to ease selection.
-renormalizeCurves(-rnc)
This flag causes the curve normalization factors to be recalculated.
-resultSamples(-rs)	time
Specify the sampling for result curves Note: the smaller this number is, the longer it will take to update the display.
-resultScreenSamples(-rss)	int
Specify the screen base result sampling for result curves. If 0, then results are sampled in time.
-resultUpdate(-ru)	string
Valid values: "interactive" "delayed" Controls how changes to animCurves are reflected in the result curves (if results are being shown). If resultUpdate is "interactive", then as interactive changes are being made to the animCurve, the result curves will be updated. If modelUpdate is delayed (which is the default setting), then result curves are updated once the final change to an animCurve has been made.
-selectionConnection(-slc)	string
Specifies the name of a selectionConnection object that the editor will synchronize with its own selection list. As the user selects things in this editor, they will be selected in the selectionConnection object. If the object undergoes changes, the editor updates to show the changes.
-showActiveCurveNames(-acn)	boolean
Display the active curve(s)'s name.
-showBufferCurves(-sb)	string
Valid values: "on" "off" "tgl" Display buffer curves.
-showCurveNames(-scn)	boolean
Display the curves's name.
-showResults(-sr)	string
Valid values: "on" "off" "tgl" Display result curves from expression or other non-keyed action.
-showUpstreamCurves(-suc)	boolean
If true, the dependency graph is searched upstream for all curves that drive the selected plugs (showing multiple curves for example in a typical driven key setup, where first the driven key curve is encountered, followed by the actual animation curve that drives the source object). If false, only the first curves encountered will be shown. Note that, even if false, multiple curves can be shown if e.g. a blendWeighted node is being used to combine multiple curves.
-smoothness(-s)	string
Valid values: "coarse" "rough" "medium" "fine" Specify the display smoothness of animation curves.
-snapTime(-st)	string
none | integer | keyframe Keyframe move snap in time.
-snapValue(-sv)	string
none | integer | keyframe Keyframe move snap in values.
-stackedCurves(-sc)	boolean
Switches the display mode between normal (all curves sharing one set of axes) to stacked (each curve on its own value axis, stacked vertically).
-stackedCurvesMax(-scx)	float
Sets the maximum value on the per-curve value axis when in stacked mode.
-stackedCurvesMin(-scm)	float
Sets the minimum value on the per-curve value axis when in stacked mode.
-stackedCurvesSpace(-scs)	float
Sets the spacing between curves when in stacked mode.
-stateString(-sts)
Query only flag. Returns the MEL command that will create an editor to match the current editor state. The returned command string uses the string variable $editorName in place of a specific name.
-unParent(-up)
Specifies that the editor should be removed from its layout. This cannot be used in query mode.
-unlockMainConnection(-ulk)
Unlocks the mainConnection, effectively restoring the original mainConnection (if it is still available), and dynamic updates.
-updateMainConnection(-upd)
Causes a locked mainConnection to be updated from the orginal mainConnection, but preserves the lock state.
-useTemplate(-ut)	string
Force the command to use a command template other than the current one.

Flag can appear in Create mode of command	Flag can appear in Edit mode of command
Flag can appear in Query mode of command	Flag can be used more than once in a command.

MEL examples

// Check to see if the "default" graph editor has been created
//
animCurveEditor -exists graphEditor1GraphEd;
// Show result curves
//
animCurveEditor -edit -showResults on graphEditor1GraphEd;
// Decrease the sampling rate for the result curves
//
animCurveEditor -edit -resultSamples 5 graphEditor1GraphEd;

// Constrain all Graph Editor animation curve drag operations to the X-axis
//
animCurveEditor -e -constrainDrag 1 graphEditor1GraphEd;