When the Warp analysis has completed, the Warp Indicator results use a plane, reference points, and a Nominal Maximum Deflection value, to evaluate the part against a maximum out-of-plane deflection.
Note: Deflection results do not use a Nominal Maximum Deflection value as the actual deflection can be determined using the Examine tool 
().
(). To set the nominal maximum deflection immediately after running a Warp analysis, apply the following steps.
- On the Warp page of the Summary pane, which appears automatically at the end of the analysis, click a Warpage indicatorresult. The Warp Constraints dialog appears.
- Define and set up the required plane for warpage comparison. The defined plane will apply to all other Warp results. A best fit transformation will be used to display the warpage if no anchor plane is defined.
- Accept the default maximum deflection value, or enter a specific value in the Nominal max. deflection text box.
- Click Apply to calculate the Warpage Indicator results.