Redefining nominal maximum deflection when viewing warpage results

When the Warp analysis has completed, the Warp Indicator results use a plane, reference points, and a Nominal Maximum Deflection value, to evaluate the part against a maximum out-of-plane deflection.

Note: Deflection results do not use a Nominal Maximum Deflection value as the actual deflection can be determined using the Examine tool (Results tab > Examine panel > Examine).

When viewing the warpage results you may need to redefine the nominal maximum deflection value.

To redefine the nominal maximum deflection value, apply the following steps.

1. Click (Results tab > Results panel > Warpage Constraints).
2. Click Restore default value to define the default maximum deflection, or enter a specific value in the Nominal max. deflection text box.
3. Click Apply to recalculate the Warp results. Any defined Anchor Plane or Best Fit plane will still be utilized. A best fit transformation will be used to display the warpage if no plane is defined.