| Edge display on undeformed part |
Specify how the feature edges are to be displayed on the modeled (undeformed) part.
- Off (Edge display on undeformed part)
-
Turn off the display of feature edges in the modeled (undeformed) part.
- Feature lines (Edge display on undeformed part)
-
Allow features in the modeled (undeformed) part to be highlighted by making visible relevant feature edges.
|
| Edge display on deformed part |
Specify how the feature edges are to be displayed on the deformed representation of the part in a deflection plot. Note: The Edge display on deformed part options are only relevant if Overlay with undeformed part is selected on the Deflection tab of the Plot properties dialog.
- Off (Edge display on deformed part)
-
Turn off the display of feature edges on the deformed representation of the part in a deflection plot.
- Feature lines (Edge display on deformed part)
-
Allow features on the deformed representation of the part in a deflection plot to be highlighted by making visible relevant feature edges.
|
| Surface display |
Specify how the surface of the model is to be displayed in the result plot.
- Opaque
- Overlay the result plot on a solid (gray) representation of the model.
- Transparent
- Overlay the result on a semi-transparent representation of the model.
- The lower the opacity value, the more transparent the model will appear.
- Opacity
- Specify the degree of transparency for the model display.
The lower the opacity value, the more transparent the model will appear.
Enter a value between 1 (solid) and 0 (not visible).
|