To access this dialog,
().
Note: The Mold and Runner System Tools are not available for a
Part Only
mold type.
Dialog elements
- Sprue
- Specify the sprue position by entering its coordinates or by selecting it with the cursor. The sprue type and its parameters can also be specified.
- X:
- Enter the coordinate of the sprue in the X-direction.
- Y:
- Enter the coordinate of the sprue in the Y-direction.
- Middle of the mold
- Positions the sprue at the center of the mold along the X, Y axis.
- Properties
- Shows the type, shape and dimension for the selected item.
- Runners
- Include runners in the feed system and specify their type and parameters.
- Create runners
- Create the runners automatically.
- Properties
- Shows the type, shape and dimension for the selected item.
- Gates
- Include gates in the feed system, and specify their type and parameters.
- Create gates
- Create the gates automatically.
- Properties
- Shows the type, shape and dimension for the selected item.
- Layout
- Select a layout for your runner system.
- Use intersection testing
- Adjust the runner system, in order to avoid possible collision with the cooling system or the part.