Setting up Autodesk Inventor for exporting files

You can export geometry from Autodesk Inventor 2014 into Autodesk Moldflow Adviser.

1. Open Autodesk Inventor
2. Ensure the Autodesk Moldflow Adviser third party component is running.
   1. Select Tools > Add-ins.

      The Add-in manager dialog is displayed.

   2. Find Autodesk Moldflow Adviser in the list.
   3. Ensure the Loaded/Unloaded checkbox is selected.
   4. Ensure the Load On Startup checkbox is selected.
   5. Select OK.
   Note: If you cannot see the Autodesk Moldflow Adviser toolbar, click Tools > Customize, then select Autodesk Moldflow Adviser from the Toolbars tab and click Show.
3. Open a model or create a new one.
4. Select Tools > Autodesk Moldflow Adviser > Moldflow Adviser.

   Autodesk Moldflow Adviser launches.