This dialog allows you to set the bubbler/baffle type, start and end point coordinates, method of connection between cooling channel segments, and modeling grid settings.
To access this dialog, click 
().
Note: The Cooling tools are not available for the
Part Only
mold type.
There are two ways to use this dialog to create bubbler/baffle:
- Enter the X, Y and Z coordinates in the Start point and End point section, and then click Apply, or
- Set the cooling plane, and then click on the display to set the bubbler/baffle Start point. Repeat for the bubbler/baffle End point. The X, Y and Z coordinates of the Start point and End point will be updated automatically.
The Grid settings allow you to display or hide a modeling grid, and add and/or set a cooling plane. If the modeling grid is displayed, you can choose the Snap to grid option to help you locate cooling channel segments precisely. You can also access the default grid properties and change them if necessary.
Dialog elements
- Bubbler/Baffle Type
- Indicates the type, shape and dimension of the bubbler or baffle.
Click
to edit the bubbler or baffle properties. - Start point
- Specifies the coordinates that will be used as a starting point for the bubbler or baffle.
- X, Y and Z start point coordinates
- Enter coordinates in the X, Y, and Z text boxes to specify the start point coordinates of the bubbler or baffle.
- End point
- Specifies the coordinates that will be used as an ending point for the bubbler or baffle.
- Relative position
- Specify that the End point coordinates indicate a distance from the Start point, and not an absolute location.
- X, Y and Z end point coordinates
- Enter coordinates in the X, Y and Z text boxes to specify the end point coordinates of the bubbler or baffle.