This page of the Process Settings Wizard, which can be accessed by clicking 
(), is used to specify the reactive molding related process settings for the selected analysis sequence.
| Dialog element | Explanation |
|---|---|
| Melt initial conversion |
To specify the level of conversion (curing), enter a value between -1 and 1, where
|
| Curing time |
Enter the time, in seconds, that the melt will take to solidify to an acceptable state. |
| %Air mass |
The percentage of air mass value is used to simulate the effect of air in the molding compound on the polymer flow. In most cases, it can be set to zero (0). If this value is not zero, it will have an effect on the compressibility of the compound. |
| Preconditioning analysis | Preconditioning data are used to calculate the melt temperature. If you choose to perform preconditioning analysis, click Edit Data to specify the preconditioning data |