Prerequisite setup tasks for a Microcellular Injection molding analysis

The following table summarizes the setup tasks required to prepare a Microcellular injection molding analysis of a non fiber-filled, or fiber-filled thermoplastic material.

Setup task Analysis technology
Molding processes Midplane Dual Domain
Meshing the model Midplane Dual Domain
Checking the mesh before analysis Midplane Dual Domain
http://beehive.autodesk.com/community/service/rest/cloudhelp/resource/cloudhelpchannel/guidcrossbook/jsonp?v=2016&p=MFIA&l=ENU&guid=GUID-22958A28-D189-490E-B032-2FB5F2512F47 Midplane Dual Domain
Selecting a material 1  MidplaneDual Domain
Injection locations Midplane Dual Domain
Velocity/pressure switch-over point Midplane Dual Domain
http://beehive.autodesk.com/community/service/rest/cloudhelp/resource/cloudhelpchannel/guidcrossbook/jsonp?v=2016&p=MFIA&l=ENU&guid=GUID-B93013B4-1789-4D8F-A186-7457BABB48E1 Midplane Dual Domain

Optional setup tasks

Setup task Supported for analysis technology
Velocity/pressure switch-over options Midplane Dual Domain
Occurrence numbers Midplane Dual Domain
Cavity/core side mold temperatures Midplane Dual Domain
Valve gates Midplane Dual Domain
Parent topic: Microcellular Injection Molding analysis
1 Select a fiber filled material to run a Fiber orientation analysis.