Message text
** ERROR 304519 ** The pin nominal diameter (XXX) for valve gate controller (YYY) is too large.
Explanation
The nominal pin diameter that you have entered for the valve gate controller indicated in the error message, is too large. The nominal pin diameter refers to the straight section of the pin, immediately above the pin tip, as indicated by the figure below:
Nominal Pin Diameter
where A indicates the nominal pin diameter.
Resolution
Check and correct the value you have entered in the View/Edit Valve Gate Controller dialog.
To access the View/Edit Valve Gate Controller dialog,
- Click
() and select Create/Edit. - Select the valve gate controller identified in the error message and click View/Edit.
- In the View/Edit Valve Gate Controller dialog, change the Maximum pin stroke to the correct value.
- Click OK to close the dialog, and all subsequent dialogs.