Edit a Revolve

Modify the sketch for the revolve geometry or change the properties.

For information about using revolutions in families, see Creating Family Geometry.

1. In the drawing area, select the revolve.
2. If you are in the project environment:
   1. On the Modify | <Element> tabMode panel, click (Edit Family).
   2. In the Family Editor, select the revolve in the drawing area again.
3. Click Modify | Revolve tabMode panel (Edit Revolve).
4. If desired, modify the revolve sketch.
5. To edit other revolve properties, on the Properties palette, change the start and end angle values, visibility, material, or subcategory.
6. To change the revolve to a solid or a void, under Identity Data, for Solid/Void, select Solid or Void.
7. Click Apply.
8. On the Mode panel, click (Finish Edit Mode).