Create rectangular contour using two points

With this tool, you can cut rectangular contours defined by two points from a plate. They can be attached as inner contours as well as outer contours.

Note: To create the two points the Ortho mode must be turned off.

To access the command

Features tool palette:

Command line: _AstM4PlateInnerContour RECTANGLE2DIG

To create a rectangular contour using two points

1. Features tool palette: Click .
2. Select a plate to process.
3. Define the first corner point by selecting or entering coordinates.
4. Specify the diagonal opposite corner point by selecting or entering coordinates.

• The contour is created.