All shear studs have default properties that you can change in the properties dialog box, which automatically opens after you create a shear stud pattern.
Definition tab
Type
Select the stud shear standard from the list.
Grade
Select the steel grade from the list.
Coating
Select the coating from the list.
Diameter
Select the stud shear diameter from the list.
Length
Defines the length of the stud shears.
Naming tab
This tab of the properties dialog box allows you to define the information to display in the BOM. Also, it is possible to select the properties to be taken into account at numbering.
Single part mark
- Defines the single part mark assigned to the element.
- The check box in front of the single part and main part mark cannot be changed. They only indicate whether the element is a main part or an attached part. The element will be listed with that number in the material lists that is ticked off.
Single part prefix
Defines the prefix for the single part mark. You can change the prefix using the Change prefix tool.
Single part counter
- If the numbering method "With drawing number" was used, this field displays the single part counter.
- In the next fields you can enter the information to display in the structured BOM.
Model role
Assigns the role in the model. It is considered e.g. in the drawing creation to assign a presentation, dimensioning and labeling style.
Commodity number
Defines the commodity number of the element.
Predefined remark
Notes concerning the element that you can save in a database and use directly from the Predefined remark drop-down list.
To add a predefined remark, access the AstorBase database located in ProgramData > Autodesk >Advance Steel 2016 > Steel\Data .
Open the Access file and configure your Denotations in the Notes table:
Free remark
Other notes concerning the element.
Display type tab
On this tab of the properties dialog box, you can select the stud shear display type.
|
Display type |
Stud shears |
|
Standard |
|
|
Solids |
|