To Project Objects to Multiple Section Views

1. Click Home tabProfile & Section Views panelSection Views drop-downProject Objects To Multiple Section Views Find.
2. Do one of the following:
   • Select a sample line in the drawing to select a sample line group. By selecting a sample line group, objects will be projected to all section view groups that have been created from the sample line group.
   • Select a section view in the drawing to select a section view group. By selecting a section view group, objects will be projected only to those section views in that group.

   The Project Objects To Multiple Section Views dialog box is displayed.

3. You can select a different sample line group or section view group, depending on which type you selected in Step 2.
   Note: You cannot switch between sample line group and section view group after running the command. If you want to switch, click Cancel and run the command again.
4. Specify the Projection Rules. You can specify a distance before and after the sample lines or you can specify a percentage.
   Note: The projection rules do not apply to feature lines, survey figures, or 3D polylines. Those objects are projected only when they intersect a sample line for a given section view.
   Note: A distance or percent of zero projects non-linear objects whose insertion point is exactly on the sample line.
5. Select the types of objects to project and specify their settings.
   Note: You can control individual object settings later by using the Projections tab of the Section View Properties dialog box. For example, if you only want one feature line projected, you can clear all of the other feature lines from the selection.
   Note: The way that a solid that spans multiple sections is projected depends on the Projection Rules settings, the projection style settings, and the location of the solid. If any part of the solid falls within the area defined by the Projection Rules, then the solid can be projected to that section view. If the section's sample line does not actually cross the solid, you must clear the Section check box on the Section tab of the Projection Style dialog box in order for the projected solid to be visible in the section view. If you want to see a specific solid projected in a section view, you may need to manually select that solid and project it to the view.
6. Click OK.